General description

The NTS0304E is a 4-bit, dual supply translating transceiver family with auto direction

sensing, that enables bidirectional voltage level translation. It features eight 1-bit inputoutput ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (0.95 V, 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.

Features and benefits

? Wide supply voltage range:

– VCC(A): 0.95 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

? No power-sequencing required

? Maximum data rate

– Open-drain: 2 Mbps

– Push-pull: 20 Mbps

? Longer one-shot pulse for driving larger capacitive loads with much reduced ringing

and overshoot

? A-side and OE inputs accept voltages up to 3.6 V and are 3.6 V tolerant

? B-side inputs accept voltages up to 5.5 V and are 5.5 V tolerant

? ESD protection:

– IEC 61000-4-2 Class 4, 8 kV contact for B-side port

– HBM JESD22-A114E Class 2 exceeds 2000 V for both ports

– CDM JESD22-C101E exceeds 1000 V for both ports

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Package options: TSSOP14 and WLCSP12

? Specified from -40 °C to +125 °C

NTS0304EUK屬于集成電路（IC） > 專用邏輯器件。恩智浦半導體公司制造生產的NTS0304EUK專用邏輯器件專用邏輯 IC 設計提供應用特定的邏輯輸出類型，例如 BCD 速率倍增、可尋址掃描端口、總線終端陣列、CML 驅動器、比較器、ABT 掃描測試、二進制全加法器、互補對加逆變器、可配置緩沖器、觸點顫動消除器、晶體振蕩器、延遲元件、差分接收器、LVTTL 到 GTLP 收發器、存儲器解碼器、電源良好檢測器和分頻器。