1. General description

The NXS0108 is an 8-bit, dual supply translating transceiver with auto direction sensing, that

enables bidirectional voltage level translation. It features two 8-bit input-output ports (An and Bn),

one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at

any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V

and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.2 V,

1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced

to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing the damaging backflow current through the device when it is

powered down.

2. Features and benefits

? Wide supply voltage range:

? VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

? Maximum data rates:

? Push-pull: 110 Mbps

? IOFF circuitry provides partial Power-down mode operation

? Inputs accept voltages up to 5.5 V

? ESD protection:

? HBM JESD22-A114E Class 2 exceeds 2.5 kV for A port

? HBM JESD22-A114E Class 3B exceeds 15 kV for B port

? CDM JESD22-C101E exceeds 1.5 kV

? IEC61000-4-2 contact discharge exceeds 8 kV for B port

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Specified from -40 °C to +85 °C and -40 °C to +125 °C

3. Applications

? Desktop PC

? Handset

? Smartphone

? Tablet

NXS0108PW屬于集成電路（IC） > 轉換器，電平移位器。安世半導體(中國)有限公司制造生產的NXS0108PW轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。