OPA320AIDBVR中文資料英飛凌數(shù)據(jù)手冊PDF規(guī)格書

EVAL-M3-IM564 is an evaluation board for motor drive applications with single-phase, integrated PFC and 3-

phase IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon’s

motion control IC and IPM technology for motor drives with single-phase PFC.

Main features of CIPOS? Mini IPM IM564-X6D/IM564-X6DS include:

? 3 half bridges with TRENCHSTOP? 20 A/600 V and antiparallel diodes for inverter section

? 20 A/600 V CoolMOS? power MOSFETs and rapid switching emitter-controlled diodes for PFC section

? Lead-free terminal plating; RoHS compliant

? Very low thermal resistance due to DCB

? Rugged SOI gate driver technology with stability against transient and negative voltage

? Negative potential allowed up to VS =-11 V for single transmission at VBS=15 V

? Integrated bootstrap functionality

? Overcurrent shutdown

? Temperature monitor

? Undervoltage lockout at all channels

? Low side common emitter

? Cross conduction prevention

? All six switches turn off during protection

The evaluation board characteristics include:

? Input voltage 165~265 VAC

? Maximum 2800 W motor power output

? Power factor correction

? On board EMI filter

? Current sensing with single shunt

? Auxiliary power supply with 15 V, 3.3 V

? Overcurrent protection

? Overtemperature hardware protection

? Sensing of DC-link voltage

? Thermistor output

? Fault diagnostic output

? Measurement test points compatible with standard oscilloscope probes

? PCB is 148 mm × 165 mm and has two layers with 35 μm copper each

? RoHS compliant