OPA4H199MDYYTSEP中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Radiation hardened

– Single Event Latch-up (SEL) immune to 43

MeV-cm2/mg at 125°C

– ELDRS free to 30 krad(Si)

– Total Ionizing Dose (TID) RLAT for every wafer

lot up to 30 krad(Si)

? Supports defense, aerospace, and medical

applications

– Single controlled baseline

– One fabrication, assembly and test site

– Gold wire

– NiPdAu lead finish

– Available in military (–55°C to 125°C)

temperature range

– Extended product life cycle

– Extended product-change notification

– Product traceability

– Enhanced mold compound for low outgassing

? Low offset voltage: ±125 μV

? Low noise: 10.8 nV/√Hz at 1 kHz

? High common-mode rejection: 130 dB

? Low bias current: ±10 pA

? Rail-to-rail input and output

? Wide bandwidth: 4.5 MHz GBW

? High slew rate: 21 V/μs

? High capacitive load drive: 1 nF

? MUX-friendly/comparator inputs

? Low quiescent current: 560 μA per amplifier

? Wide supply: ±1.35 V to ±20 V, 2.7 V to 40 V

? Robust EMIRR performance: EMI/RFI filters on

input and supply pins

2 Applications

? Support low earth orbit space applications

? Space sensor and control (telemetry)

? Satellite electrical power system (EPS)

? Flight control

? Satellite command & data handling

? Satellite payloads

3 Description

The OPA4H199-SEP is a high voltage (40 V) general

purpose operational amplifiers for space application.

The device offers exceptional DC precision and AC

performance, including rail-to-rail input/output, low

offset (±125 μV, typ), low offset drift (±0.3 μV/°C, typ),

low noise (10.8 nV/√Hz and 1.8 μVPP), and 4.5-MHz

bandwidth.

Unique features such as differential and commonmode

input-voltage range to the supply rail,

high output current (±75 mA), high slew rate

(21 V/μs), and high capacitive load drive (1

nF) make the OPA4H199-SEP a robust, highperformance

operational amplifier for high-voltage

space applications.

The OPA4H199-SEP is available in a small-sized,

radiation-hardened plastic, 14-pin SOT-23 (DYY)

package. The SOT-23 (DYY) package has a body

size that is less than 1/5th of the size of traditional

14-pin ceramic packages. The OPA4H199-SEP is

specified from –55°C to 125°C.