OR4E4中文資料agere數據手冊PDF規格書

Product Description

Architecture Overview

The ORCA Series 4 architecture is a new generation of SRAM-based programmable devices from Lucent Technologies Microelectronics Group. It includes enhancements and innovations geared toward today’s high-speed systems on a single chip. Designed with networking applications in mind, the Series 4 family incorporates system-level features that can further reduce logic requirements and increase system speed. ORCA Series 4 devices contain many new patented enhancements and are offered in a variety of packages and speed grades.

Programmable Features

■ High-performance platform design.

— 0.13 μm seven-level metal technology.

— Internal performance of >250 MHz (four logic levels).

— I/O performance of >416 MHz for all user I/Os.

— Over 1.5 million usable system gates.

— Meets multiple I/O interface standards.

— 1.5 V operation (30 less power than 1.8 V operation) translates to greater performance.

— Embedded block RAM (EBR) for onboard storage and buffer needs.

— Built-in system components including an internal system bus, eight PLLs, and microprocessor interface.

■ Traditional I/O selections.

— LVTTL and LVCMOS (3.3 V, 2.5 V, and 1.8 V) I/Os.

— Per pin-selectable I/O clamping diodes provide 3.3 V PCI compliance.

— Individually programmable drive capability. 24 mA sink/12 mA source, 12 mA sink/6 mA source, or 6 mA sink/3 mA source.

— Two slew rates supported (fast and slew-limited).

— Fast-capture input latch and input flip-flop (FF)/ latch for reduced input setup time and zero hold time.

— Fast open-drain drive capability.

— Capability to register 3-state enable signal.

— Off-chip clock drive capability.

— Two-input function generator in output path.

■ New programmable high-speed I/O.

— Single-ended: GTL, GTL+, PECL, SSTL3/2 (class I & II), HSTL (Class I, III, IV), zero-bus turn-around (ZBT*), and double data rate (DDR).

— Double-ended: LDVS, bused-LVDS, LVPECL.

— Customer defined: Ability to substitute arbitrary standard-cell I/O to meet fast moving standards.

■ New capability to (de)multiplex I/O signals.

— New DDR on both input and output at rates up to 311 MHz (622 MHz effective rate).

— Used to implement emerging RapidIO? backplane interface specification.

— New 2x and 4x downlink and uplink capability per I/O (i.e., 104 MHz internal to 416 MHz I/O).

■ Enhanced twin-quad programmable function unit (PFU).

— Eight 16-bit look-up tables (LUTs) per PFU.

— Nine user registers per PFU, one following each LUT and organized to allow two nibbles to act independently, plus one extra for arithmetic carry/borrow operations.

(Continue ...)