OX16PCI952-TQFP-A中文資料OXFORD數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The OX16PCI952 is a single chip solution for PCI-based serial and parallel expansion add-in cards. It is a dual function device, offering IO or memory mapped access to the two ultra-high performance OX16C950 UARTs and the bi-directional parallel port. These functions are defined by Function 0 and Function 1, respectively. Serial port cards with 2 serial ports and a parallel port can be designed without redefining any device parameters.

FEATURES

? Two 16C950 High performance UART channels

? IEEE1284 Compliant SPP/EPP/ECP parallel port

? Multi-function target PCI controller. Fully compliant to PCI bus specification 2.2 and PCI Power Management 1.0.

? Function access to pre-configure each UART and the parallel port, prior to handover to generic device drivers.

? UARTs fully software compatible with 16C550-type devices.

? Baud rates up to 15Mbps in asynchronous mode and 60Mbps in external 1x clock mode

? 128-byte deep FIFO per transmitter and receiver

? Flexible clock prescaler from 1 to 31.875

? Automated in-band flow control using programmable Xon/Xoff in both directions

? Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR#

? Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-ofband flow control

? Infra-red (IrDA) receiver and transmitter operation

? 5, 6, 7, 8 and 9-bits data framing

? Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers

? Detection of bad data in the receiver FIFO

? 2 multi-purpose IO pins which can be configured as interrupt inputs or ‘wake-up’ pins (via local registers).

? Auto-detection of a range of optional MicrowireTM compatible EEPROMs, to reconfigure device.

? Operation via IO or memory mapping.

? 5.0V operation

? 128 pin TQFP package