PB58中文資料Apex數據手冊PDF規格書
PB58規格書詳情
DESCRIPTION
The PB58 is a high voltage, high current amplifer designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feed back loop of the driver amplifer results in a composite amplifer with the accuracy of the driver and the extended output voltage range and current capability of the booster. The PB58 can also be used without a driver in some applications, requiring only an external current limit resistor to function properly.
The output stage utilizes complementary MOSFETs, providing symmetrical output impedance and eliminating second breakdown limitations imposed by Bipolar Transistors. Internal feedback and gainset resistors are provided for a pin-strapable gain of 3. Additional gain can be achieved with a single external resistor. Compensation is not required for most driver/gain confgurations, but can be accomplished with a single external capacitor. Enormous ?exibility is provided through the choice of driver amplifer, current limit, supply voltage, voltage gain, and compensation.
This hybrid circuit utilizes a beryllia (BeO) substrate, thick flm resistors, ceramic capacitors and semiconductor chips to maximize reliability, minimize size and give top performance. Ultrasonically bonded aluminum wires provide reliable interconnections at all operating temperatures. The 8-pin TO-3 package is electrically isolated and hermetically sealed using one-shot resistance welding. The use of compressible isolation washers voids the warranty.
FEATURES
? WIDE SUPPLY RANGE — ±15V to ±150V
? HIGH OUTPUT CURRENT —
1.5A Continuous (PB58)
2.0A Continuous (PB58A)
? VOLTAGE AND CURRENT GAIN
? HIGH SLEW — 50V/μs Minimum (PB58)
75V/μs Minimum (PB58A)
? PROGRAMMABLE OUTPUT CURRENT LIMIT
? HIGH POWER BANDWIDTH — 320 kHz Minimum
? LOW QUIESCENT CURRENT — 12mA Typical
? EVALUATION KIT — See EK50
APPLICATIONS
? HIGH VOLTAGE INSTRUMENTATION
? Electrostatic TRANSDUCERS & DEFLECTION
? Programmable Power Supplies Up to 280V p-p
產品屬性
- 型號：
PB58
- 功能描述：
運算放大器 - 運放 Power Booster 300V 2A
- RoHS：
否
- 制造商：
STMicroelectronics
- 通道數量：
4
- 共模抑制比（最小值）：
63 dB
- 輸入補償電壓：
1 mV
- 輸入偏流（最大值）：
10 pA
- 工作電源電壓：
2.7 V to 5.5 V
- 安裝風格：
SMD/SMT
- 封裝/箱體：
QFN-16
- 轉換速度：
0.89 V/us
- 關閉：
No
- 輸出電流：
55 mA
- 最大工作溫度：
+ 125 C
- 封裝：
Reel
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
APEX |
21+ |
TO |
12588 |
原裝正品,自己庫存 假一罰十 |
詢價 | ||
APEX |
24+ |
TO3 |
56000 |
公司進口原裝現貨 批量特價支持 |
詢價 | ||
APEX |
24+ |
TO-3 |
102 |
詢價 | |||
APEX |
18+ |
to-3 |
85600 |
保證進口原裝可開17%增值稅發票 |
詢價 | ||
CIRRUS |
23+ |
原廠原包 |
19960 |
只做進口原裝 終端工廠免費送樣 |
詢價 | ||
APEX |
22+ |
NA |
500000 |
萬三科技,秉承原裝,購芯無憂 |
詢價 | ||
APEX |
2447 |
TO-3-8 |
315000 |
10個/管一級代理專營品牌!原裝正品,優勢現貨,長期 |
詢價 | ||
23+ |
CAN8 |
7000 |
詢價 | ||||
APEX |
專業鐵帽 |
CAN-8 |
67500 |
鐵帽原裝主營-可開原型號增稅票 |
詢價 | ||
CirrusLogic |
23+ |
TO-3-8 |
65480 |
詢價 |
