PIC16CR7X中文資料微芯科技數(shù)據(jù)手冊PDF規(guī)格書

28/40-Pin, 8-Bit CMOS ROM Microcontrollers

High-Performance RISC CPU:

? High-performance RISC CPU

? Only 35 single-word instructions to learn

? All single-cycle instructions except for program branches which are two-cycle

? Operating speed: DC – 20 MHz clock input

DC – 200 ns instruction cycle

? Up to 8K x 14 words of ROM Program Memory, Up to 368 x 8 bytes of Data Memory (RAM)

? Function compatible to the PIC16F73/74/76/77

? Pinout compatible to the PIC16F873/874/876/877

? Interrupt capability (up to 12 sources)

? Eight-level deep hardware stack

? Direct, Indirect and Relative Addressing modes

? Processor read access to program memory

Special Microcontroller Features:

? Power-on Reset (POR)

? Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

? Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

? Power-Saving Sleep mode

? Selectable oscillator options

Peripheral Features:

? Timer0: 8-bit timer/counter with 8-bit prescaler

? Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock

? Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

? Two Capture, Compare, PWM modules:

- Capture is 16-bit, max. resolution is 12.5 ns

- Compare is 16-bit, max. resolution is 200 ns

- PWM max. resolution is 10-bit

? 8-bit, up to 8-channel Analog-to-Digital converter

? Synchronous Serial Port (SSP) with SPI (Master mode) and I2C? (Slave)

? Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI)

? Parallel Slave Port (PSP), 8-bits wide with external RD, WR and CS controls (40/44-pin only)

? Brown-out detection circuitry for Brown-out Reset (BOR)

CMOS Technology:

? Low-power, high-speed CMOS ROM technology

? Fully static design

? Wide operating voltage range: 2.0V to 5.5V

? High Sink/Source Current: 25 mA

? Industrial temperature range

? Low power consumption:

- < 2 mA typical @ 5V, 4 MHz – TBD

- 20 μA typical @ 3V, 32 kHz – TBD

-