PM4344電感器線圈扼流圈的固定電感器規(guī)格書PDF中文資料

FEATURES

? Monolithic single-chip device that integrates four full-featured T1 framers and transmitters for terminating duplex DS1 signals.

? Supports SF, ESF, T1DM (DDS), and SLC?96 format DS1 signals.

? Supports unframed mode. Supports B8ZS or AMI line codes.

? Supports transfer of PCM and signalling data to/from 1.544 Mbit/s, 2.048 Mbit/s, 12.352 Mbit/s, or 16.384 Mbit/s backplane buses.

? Supports n x DS0 backplane interface for fractional T1.

? Provides robbed-bit signalling extraction/insertion, programmable idle and digital milliwatt code substitution, and two superframes of signalling debounce on a per-channel basis.

? Provides trunk conditioning which forces programmable trouble code substitution and signalling conditioning on all/selected channels.

? Provides ESF bit-oriented code detection/generation, and an HDLC interface for terminating/generating the ESF data link.

? Software and functionally compatible with the PM4341A T1XC Single T1 Transceiver. Pin-compatible with the PM6344 EQUAD Quad E1 Framer.

? Provides an 8-bit microprocessor bus interface for configuration, control, and status monitoring.

? Low power 5 V CMOS technology.

? Available in a rectangular 128-pin PQFP (14 by 20 mm) package. RECEIVE SECTION

? Recovers clock and data using a digital PLL for high jitter tolerance.

? Accepts/provides dual- or single-rail digital PCM inputs/outputs. Accepts gapped data streams to support higher rate demultiplexing.

? Provides Loss Of Signal (LOS) detection, and red, yellow, and Alarm Indication Signal (AIS) alarm detection.

? Detects violations of the ANSI T1.403 12.5 pulse density rule over a moving 192-bit window.

? Provides programmable in-band loopback code detection.

? Supports line and path performance monitoring according to AT&T and ANSI specifications. Accumulators are provided for counting, ESF CRC-6 errors, Framing bit errors, Line Code Violations (LCVs), and Loss Of Frame (LOF) or change of frame alignment events.

? Extracts the data link in ESF, T1DM (DDS), or SLC?96 modes. Extracts selected channels.

? Provides a 2-frame elastic store buffer for jitter and wander attenuation.

APPLICATIONS

? T1/T3 Multiplexers and Digital Private Branch Exchanges (PBXs)

? T1 Frame Relay Interfaces

? T1 ATM Interfaces

? Fractional T1 Interfaces

? Digital Access and Cross-Connect Systems (DACS) and Electronic DSX Cross-Connect Systems (EDSXs)

? Digital Loop Carriers (DLCs)

? T1 Channel Service Units (CSUs) and Data Service Units (DSUs)

? ISDN Primary Rate Interfaces (PRIs)

? SONET Add/Drop Multiplexers (ADMs)