PM5352中文資料PMC數(shù)據(jù)手冊(cè)PDF規(guī)格書

DATASHEET OVERVIEW

The PM5352 S/UNI-STAR is functionally equivalent to a single channel PM5351 S/UNI-TETRA (TETRA channel #4). The devices are software compatible and pin compatible. This datasheet provides a complete pinout description for the S/UNI-STAR, as well as any differences between these devices (including boundary scan register, test mode 0 register). For a complete functional and register description, please refer to the PMC-971240.

FEATURES

General

? Single chip ATM User-Network Interface operating at 155.52 Mbit/s.

? Implements the ATM Forum User Network Interface Specification and the ATM physical layer for Broadband ISDN according to CCITT Recommendation I.432.

? Implements the Point-to-Point Protocol (PPP) over SONET/SDH specification according to RFC 1619/1662 of the PPP Working Group of the Internet Engineering Task Force (IETF).

? Processes duplex 155.52 Mbit/s STS-3c (STM-1) data streams with on-chip clock and data recovery and clock synthesis.

? Exceeds Bellcore GR-253-CORE jitter tolerance and intrinsic jitter criteria.

? Exceeds Bellcore GR-253-CORE jitter transfer and phase variation criteria.

? Provides control circuitry required to exceed Bellcore GR-253-CORE WAN clocking requirements related to wander transfer, holdover and long term stability when using an external VCXO.

? Compatible with ATM Forum’s Utopia Level 2 Specification with MultiPHY addressing and parity support.

? Implements the POS-PHY 16-bit System Interface for Packet over SONET/SDH (POS) applications. This system interface is similar to Utopia Level 2, but adapted to packet transfer. Both byte-level and packet-level transfer modes are supported.

? Provides a standard 5 signal IEEE 1149.1 JTAG test port for boundary scan board test purposes.

? Provides a generic 8-bit microprocessor bus interface for configuration, control, and status monitoring.

? Low power 3.3V CMOS with PECL and TTL compatible inputs and CMOS/TTL outputs, with 5V tolerance inputs (system side interface is 3.3V only).

? Industrial temperature range (-40°C to +85°C).

? 304 pin Super BGA package.

APPLICATIONS

? DSLAM uplinks

? Access Concentrators

? WAN and edge ATM switches.

? LAN switches and hubs.

? Layer 3 switches.

? Multiservice switches (FR, ATM, IP, etc..).