PN54SC8T541MPWTSEP中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? VID TBD

? Radiation Tolerant:

– Single Event Latch-Up (SEL) immune up to

43MeV-cm2/mg at 125°C

– Total Ionizing Does (TID) Radiation Lot

Acceptance Testing (RLAT) for every wafer lot

up to 30 krad(Si)

– Single Event Transient (SET) characterized up

to LET = 43MeV-cm2/mg

? Wide operating range of 1.2V to 5.5V

? Single-supply voltage translator:

– Up translation:

? 1.2V to 1.8V

? 1.5V to 2.5V

? 1.8V to 3.3V

? 3.3V to 5.0V

– Down translation:

? 5.0V, 3.3V, 2.5V to 1.8V

? 5.0V, 3.3V to 2.5V

? 5.0V to 3.3V

? 5.5V tolerant input pins

? Supports standard pinouts

? Up to 150Mbps with 5V or 3.3V VCC

? Latch-up performance exceeds 250mA

per JESD 17

? Space enhanced plastic:

– Controlled baseline

– Au bondwire and NiPdAu lead finish

– Meets NASA ASTM E595 outgassing

specification

– One fabrication, assembly, and test site

– Extended product life cycle

– Product traceability

2 Applications

? Enable or disable a digital signal

? Controlling an indicator LED

? Translation between communication modules and

system controllers

3 Description

The SN54SC8T541-SEP contains eight buffers with

3-state outputs. The active low output enable pins

(OE1 and OE2) control all eight channels, and are

configured so that both must be low for the outputs to

be active. When the outputs are enabled, the outputs

are actively driven low or high. When the outputs are

disabled, the outputs are set into the high-impedance

state. The output level is referenced to the supply

voltage (VCC) and supports 1.8V, 2.5V, 3.3V, and 5V

CMOS levels.

The input is designed with a lower threshold circuit to

support up translation for lower voltage CMOS inputs

(for example, 1.2V input to 1.8V output or 1.8V input

to 3.3V output). In addition, the 5V tolerant input pins

enable down translation (for example, 3.3V to 2.5V

output).