PTCAN1472VDRQ1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC Q100 (Grade 1): Qualified for automotive

applications

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Meets the requirements of ISO 11898-2:2024

standard including CAN SIC specifications of

Annex A

? Classical CAN and CAN FD up to 8Mbps

– Actively improves the bus signal by reducing

ringing effects in complex topologies

– Backward compatible for use in classic CAN

networks

? VIO level shifting supports: 1.7V to 5.5V

? Operating Modes

– Normal mode

– Low-power standby mode supporting remote

wake-up request

? Passive behavior when unpowered

– Bus and logic terminals are high impedance (no

load to operating bus or application)

– Hot plug capable: power up or down glitch free

operation on bus and RXD output

– Defined device behavior with floating logic pins

and in undervoltage supply conditions

? Protection features

– IEC ESD protection on bus pins

– ±58V CAN bus fault tolerant

– Undervoltage protection on VCC and VIO

(V variants only) supply terminals

– TXD dominant state timeout (TXD DTO)

– Thermal shutdown protection (TSD)

? Available in SOIC (8), small footprint SOT-23 (8)

and leadless, VSON (8) package with wettable

flanks for improved automated optical inspection

(AOI) capability

2 Applications

? Automotive gateway

? Advanced driver assistance system (ADAS)

? Body electronics and lighting

? Hybrid, electric & powertrain systems

? Automotive infotainment & cluster

3 Description

The TCAN1472-Q1 devices are high speed Controller

Area Network (CAN) SIC transceiver that meet the

physical layer requirements of the ISO 11898-2:2024

Annex A Signal Improvement Capability (SIC)

specifications. The devices reduce signal ringing

at dominant-to-recessive edge and enable higher

throughput in complex network topologies. Signal

improvement capability allows the applications to

extract real benefit of CAN FD (flexible data rate)

by operating at 2Mbps, 5Mbps or higher in large

networks with multiple unterminated stubs.

The devices meet the timing specifications mandated

by ISO 11898-2:2024 Annex A SIC specifications, and

thus have much tighter bit timing symmetry compared

to a regular CAN FD transceivers. This provides a

larger timing window to sample the correct bit, and

enables error-free communication in large complex

star networks where ringing and bit distortion are

inherent.

These devices are pin-compatible to 8-pin CAN FD

transceivers, such as TCAN1044A-Q1 or TCAN1042-

Q1.

The TCAN1472-Q1 devices with suffix 'V' include

internal logic level translation via the VIO logic supply

terminal to allow for interfacing directly to 1.8V,

2.5V, or 3.3V controllers. The transceivers support

low power standby mode which allows remote wakeup

via CAN bus compliant with ISO 11898-2:2024

defined wake-up pattern (WUP). The device family

also includes many protection features such as

undervoltage detection, thermal shutdown (TSD),

driver dominant timeout (TXD DTO), and ±58V bus

fault protection.