PTN3331集成電路（IC）的驅(qū)動(dòng)器接收器收發(fā)器規(guī)格書PDF中文資料

Description

The PTN3331 is a differential line driver that implements the electrical characteristics of Low-Voltage Differential Signaling (LVDS) that meets or exceeds the requirements of the ANSI TIA/EIA-644 Standard. LVDS is used to achieve higher data rates on commonly used media. LVDS overcomes the limitations of achievable slew rates and EMI restrictions of previous differential signaling techniques. The PTN3331 operates at 3.3 volt supply levels and current mode output drivers. The output drivers will deliver a minimum of 247 mV into a 100 ? load when enabled.

The intended application of this device is for point-to-point baseband transmission rates over a controlled impedance media of approximately 100 ?. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media selected and the noise coupling to the environment.

The PTN3331 is designed to function over the full industrial temperature range of ?40 °C to +85 °C

Features

■ Meets or exceeds the requirements of ANSI TIA/EIA-644 Standard

■ Low-Voltage Differential Signaling with output voltage of 350 mV across a 100 ? load

■ 300 ps maximum channel to channel output skew

■ 500 ps typical output voltage rise and fall times

■ Power dissipation of 100 mW typical at 200 MHz

■ Driver at high impedance when disabled or with VCC = 0 V

■ 5 volt tolerant inputs with Low Voltage TTL (LVTTL) logic input levels

■ Pin-compatible with AM26LS31 and SN65LVDS31.

Applications

■ Low voltage, low EMI, high speed differential signaling

■ Point-to-point high speed data transmission

■ High performance switches and routers.