Features

■ Arm Cortex-M23 Core

● Armv8-M architecture

● Maximum operating frequency: 48 MHz

● Arm Memory Protection Unit (Arm MPU) with 8 regions

● Debug and Trace: DWT, FPB, CoreSight? MTB-M23

● CoreSight Debug Port: SW-DP

■ Memory

● Up to 128-KB code flash memory

● 4-KB data flash memory (100,000 program/erase (P/E) cycles)

● 16-KB SRAM

● Memory protection units

● 128-bit unique ID

■ Connectivity

● Serial Communications Interface (SCI) × 4

– Asynchronous interfaces

– 8-bit clock synchronous interface

– Simple IIC

– Simple SPI

– Smart card interface

● Serial Peripheral Interface (SPI) × 1

● I2C bus interface (IIC) × 1

■ Analog

● 12-bit A/D Converter (ADC12)

● Low-Power Analog Comparator (ACMPLP) × 2

● Temperature Sensor (TSN)

■ Timers

● General PWM Timer 32-bit (GPT32) × 1

● General PWM Timer 16-bit (GPT16) × 6

● Low Power Asynchronous General Purpose Timer (AGT) × 2

● Watchdog Timer (WDT)

■ Safety

● SRAM parity error check

● Flash area protection

● ADC self-diagnosis function

● Clock Frequency Accuracy Measurement Circuit (CAC)

● Cyclic Redundancy Check (CRC) calculator

● Data Operation Circuit (DOC)

● Port Output Enable for GPT (POEG)

● Independent Watchdog Timer (IWDT)

● GPIO readback level detection

● Register write protection

● Main oscillator stop detection

● Illegal memory access detection

■ Security and Encryption

● AES128/256

● True Random Number Generator (TRNG)

■ System and Power Management

● Low power modes

● Realtime Clock (RTC)

● Event Link Controller (ELC)

● Data Transfer Controller (DTC)

● Key Interrupt Function (KINT)

● Power-on reset

● Low Voltage Detection (LVD) with voltage settings

■ Human Machine Interface (HMI)

● Capacitive Sensing Unit (CTSU2)

■ Multiple Clock Sources

● Main clock oscillator (MOSC) （1 to 20 MHz）

● Sub-clock oscillator (SOSC) (32.768 kHz)

● High-speed on-chip oscillator (HOCO) (24/32/48/64 MHz)

● Middle-speed on-chip oscillator (MOCO) (8 MHz)

● Low-speed on-chip oscillator (LOCO) (32.768 kHz)

● Clock trim function for HOCO/MOCO/LOCO

● IWDT-dedicated on-chip oscillator (15 kHz)

● Clock out support

■ Up to 56 pins for general I/O ports

● 5-V tolerance, open drain, input pull-up, switchable driving ability

■ Operating Voltage

● VCC: 1.6 to 5.5 V

■ Operating Temperature and Packages

● Ta = -40℃ to +85℃

– 64-pin LQFP (14 mm × 14 mm, 0.8 mm pitch)

– 64-pin LQFP (10 mm × 10 mm, 0.5 mm pitch)

– 64-pin BGA (4 mm × 4 mm, 0.4 mm pitch)

– 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch)

– 48-pin HWQFN (7 mm × 7 mm, 0.5 mm pitch)

– 36-pin LGA (4 mm × 4 mm, 0.5 mm pitch)

– 32-pin LQFP (7 mm × 7 mm, 0.8 mm pitch)

– 32-pin HWQFN (5 mm × 5 mm, 0.5 mm pitch)

– 25-pin WLCSP (2.14 mm × 2.27 mm, 0.4 mm pitch)

● Ta = -40℃ to +105℃

– 64-pin LQFP (14 mm × 14 mm, 0.8 mm pitch)

– 64-pin LQFP (10 mm × 10 mm, 0.5 mm pitch)

– 64-pin BGA (4 mm × 4 mm, 0.4 mm pitch)

– 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch)

– 48-pin HWQFN (7 mm × 7 mm, 0.5 mm pitch)

– 36-pin LGA (4 mm × 4 mm, 0.5 mm pitch)

– 32-pin LQFP (7 mm × 7 mm, 0.8 mm pitch)

– 32-pin HWQFN (5 mm × 5 mm, 0.5 mm pitch)

– 25-pin WLCSP (2.14 mm × 2.27 mm, 0.4 mm pitch)