RC0805JR-0710KL電阻器的片式電阻器-表面貼裝規(guī)格書PDF中文資料

Eval-M3-CM615PN is an evaluation board for motor drive applications with single phase PFC integrated 3 phase

IPM. Combined in a kit with one of the available MADK control board options, it demonstrates Infineon’s motion

control IC and IPM technology for motor drives with single phase PFC.

Main features of CIPOS? Mini IPM IFCM15P60GD are:

? 3 half bridges with TRENCHSTOP? IGBT3 15A/600V and antiparallel diodes for inverter section

? 30A/650V TRENCHSTOP? 5 IGBT and rapid switching emitter controlled diode for PFC section

? Lead-free terminal plating; RoHS compliant

? Very low thermal resistance due to DCB

? Rugged SOI gate driver technology with stability against transient and negative voltage

? Negative potential allowed up to VS =-11V for single transmission at VBS=15V

? Integrated bootstrap functionality

? Overcurrent shutdown

? Temperature monitor

? Undervoltage lockout at all channels

? Low side common emitter

? Cross conduction prevention

? All six switches turn off during protection

The evaluation board characteristics are:

? Input voltage 160~265VAC

? Maximum 650W motor power output

? Power Factor Correction

? On board EMI filter

? Current sensing with single shunt

? Auxiliary power supply with 15V, 3.3V

? Overcurrent protection

? Overtemperature hardware protection

? Sensing of DC-link voltage

? Thermistor output

? Fault diagnostic output

? Measurement test-points compatible to standard oscilloscope probes

? PCB is 120 mm × 120 mm and has two layers with 35μm copper each

? RoHS compliant