General Description

The RE46C152 is a low power CMOS ionization type smoke detector IC. With few external components this circuit will provide all the required features for an ionization type smoke detector.

An internal oscillator strobes power to the smoke detection circuitry for 10.5mS every 1.66 seconds to keep standby current to a minimum. A check for a low battery condition is performed every 40 seconds when in standby. The Tone input allows for selection of a temporal pattern or a 2/3 duty cycle continuous tone. The temporal horn pattern supports the NFPA 72 emergency evacuation signal.

An interconnect pin allows multiple detectors to be connected such that when one units alarms all units will sound.

An internal 8 minute timer allows for a separate button to be used for reduced sensitivity mode. Single button operation for test and timer mode is also possible.

Although this device was designed for smoke detection utilizing an ionization chamber it could be used in a variety of security applications.

Utilizing low power CMOS technology the RE46C152 was designed for use in smoke detectors that comply with Underwriters Laboratory Specification UL217 and UL268.

Features

? >1500V ESD Protection (HBM) on all Pins

? Guard Outputs for Ion Detector Input

? +/-0.75pA Detect Input Current

? Internal Reverse Battery Protection

? Low Quiescent Current Consumption (<6.5uA)

? 16L PDIP

? Internal Low Battery Detection

? Power Up Low Battery Test

? Interconnect up to 40 Detectors

? Pin selectable horn patterns

? 8 Minute Timer for Sensitivity Control

? Available in RoHS Compliant Pb Free Packaging.

RE46C152屬于集成電路（IC） > 傳感器和檢測器接口。微芯科技股份有限公司制造生產的RE46C152傳感器和檢測器接口該系列產品可執行信號調節、數據轉換、激勵生成和/或各種將傳感器或變送器機構連接到主機設備所需的其他功能。示例包括用于 CCD 圖像傳感器的控制器、用于 4-20 mA 接口和類似應用的電流變送器、超聲變送器前端、惠斯通電橋接口等。