REF2510R測試與計量的設備-專用規格書PDF中文資料

REF2510R屬于測試與計量的設備-專用。由Amphenol Wilcoxon Sensing Technologies.制造生產的REF2510R設備 - 專用專用設備包括儀表、分析儀、監視器和特定用途模塊，例如電池、連續性、電纜、燈、絕緣、完整性、多媒體、電阻、脈沖發生器、振動和量具安裝測試儀、電纜故障查找器、校準器、CAN BUS、蜂窩信號、顏色、數字、串行、邏輯、二極管、能量、電機驅動分析儀。

Description

The ReferenceMate portable vibration reference source enables users in the field to easily verify sensor performance and the integrity of the cabling between the sensor and read-out equipment, either online or portable units.

A built-in reference accelerometer assures that a 1 g test level is maintained for a unit under test (sensor and mounting hardware) weighing up to 250 grams.

Frequency of operation and measurement types (peak/RMS) are selected with front panel push buttons.

? 61.4 Hz for imperial measurements, where 1 g is equal to 1 inch per second (ips), ideal for use with velocity sensors

? 100 Hz to confirm accelerometer performance at the same reference frequency used by most manufacturers

? 159.2 for metric measurements, where 1 g is equal to 9.81 m/sec2 and 9.81 mm/sec.

A bottom-mounted D-ring belt clip is included for hands-free transport between locations when in the field. The belt clip can be removed and replaced with a 70 lbf pull force magnet (optional) for attachment to metal structures for hands-free operation.

LEDs notify the user when the battery condition falls below operational levels or if the unit is overloaded. Reference test points are provided to test and check calibration of the shaker’s internal accelerometer.

Applicable models

The manual covers the model REF2500 handheld shaker included in the REF2510 and REF2510R kits, and the use of applicable accessories, both standard and optional.