RHFL6000L中文資料意法半導體數(shù)據(jù)手冊PDF規(guī)格書

Features

? Input voltage range from 2.5 V to 12 V

? Adjustable output voltage from 0.6 V to 9 V

? 2 A guaranteed output current

? Low dropout voltage: 0.3 V typ. @ 0.4 A

? Embedded overtemperature and overcurrent protection

? Adjustable overcurrent limitation

? Output overload monitoring/signalling

? Internal control loop accessible via an external pin, optional, providing flexibility

for stability margin tuning

? Inhibit (ON/OFF) TTL compatible control

? Programmable output short-circuit current

? Remote sensing operation

? Rad-hard: guaranteed up to 300 krad MIL-STD-883J method 1019.9 high dose

rate and 0.01 rad/s in ELDRS conditions

? Radiation environment: SET/SEL/SEB:

- SEL free @ LET=120 MeV/cm2/mg

- SET: less than 3.3 of VOUT@ 120 MeV

? Heavy-ions SET dedicated internal circuitry implemented for absorbing output

transient

? Operating junction temperature range: -55 °C to 125 °C

Description

The RHFL6000L high-performance adjustable positive voltage regulator provides

exceptional radiation performance. It is tested in accordance with MIL-STD-883J

method 1019.9, in ELDRS conditions. The device is available in the Flat-16P, a

hermetic ceramic package. A dedicated internal circuitry is implemented to absorb

output transients during SET events. The operating input voltage goes from 2.5 V to

12 V.

The RHFL6000L is an upgraded version of the RHFL6000A and is intended to

extend the range of the regulated output voltages down to 0.6 V.