RS1A11工業(yè)自動化與控制的延時(shí)繼電器規(guī)格書PDF中文資料

Description

The RS Series is a solid-state, encapsulated, recycling timer

designed for tough industrial environments. It is used by many

testing labs as a life cycle tester; by others as a cycle controller.

The RS Series has separate DIP switch adjustments for the

on delay and the off delay. These make accurate adjustment

possible the first time, every time. Time delays of 0.1 seconds

to 1023 hours are available in 4 ranges.

Operation (Recycling - ON Time First)

Upon application of input voltage, the output energizes and

the T1 ON time begins. At the end of the ON time, the output

de-energizes and the T2 OFF time begins. At the end of the

OFF time, the output energizes and the cycle repeats as long as

input voltage is applied.

Reset: Removing input voltage resets the output and time

delays, and returns the sequence to the ON time.

Operation (Recycling - OFF Time First)

Upon application of input voltage, the T2 OFF time begins. At

the end of the OFF time, the output energizes and the T1 ON

time begins. At the end of the ON time, the output de-energizes

and the cycle repeats as long as input voltage is applied.

Reset: Removing input voltage resets the output and time

delays, and returns the sequence to the OFF time.

Features & Benefits

FEATURES BENEFITS

Microcontroller based Repeat Accuracy + / -0.1,

Setting accuracy + / - 2

1A steady, 10A inrush

solid-state output Provides 100 million operations in typical conditions

Totally solid state

and encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity

ON and OFF time

delay settings

Independent adjustment provides greater

timing flexibility

DIP switch adjustment Provides first time setting accuracy