RT9706PB中文資料RichTek數(shù)據(jù)手冊PDF規(guī)格書

General Description

The RT9706 is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The RT9706 equipped with a charge pump circuitry to drive the internal MOSFET switch; the switchs low RDS(ON) 80mΩ, meets USB voltage drop requirements; and a flag output is available to indicate fault conditions to the local USB controller.

Features

● Compliant to USB Specifications

● Built-In (Typically 80mΩ) N-Channel MOSFET

● Output Can Be Forced Higher than Input (Off-State)

● Low Supply Current :

?25μA Typical at Switch On State

?0.1μA Typical at Switch Off State

● Guaranteed 500mA Continuous Load Current

● Wide Input Voltage Ranges : 2V to 5.5V

● Open-Drain Fault Flag Output

● Hot Plug-In Application (Soft-Start)

● 1.7V Typical Under-Voltage Lockout (UVLO)

● Current Limiting Protection

● Thermal Shutdown Protection

● Reverse Current Flow Blocking (no body diode)

● Smallest SOT-23-5 Package Minimizes Board Space

● UL Approved?E219878

● RoHS Compliant and 100 Lead (Pb)-Free

Applications

● USB Bus/Self Powered Hubs

● USB Peripherals

● ACPI Power Distribution

● PC Card Hot Swap

● Notebook, Motherboard PCs

● Battery-Powered Equipment

● Hot-Plug Power Supplies

● Battery-Charger Circuits