S9KEAZ64ACLH中文資料恩智浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書(shū)

1 Key features

1.1 Operating characteristics

? Voltage range: 2.7 to 5.5 V

? Flash write voltage range: 2.7 to 5.5 V

? Temperature range (ambient): -40 to 125°C

1.2 Performance

? Up to 48 MHz Arm? Cortex-M0+ core

? Single cycle 32-bit x 32-bit multiplier

? Single cycle I/O access port

1.3 Memories and memory interfaces

? Up to 128 KB flash

? Up to 16 KB RAM

1.4 Clocks

? Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low

power or high gain oscillators

? Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed internal

reference for 48 MHz system clock

? Internal 1 kHz low-power oscillator (LPO)

1.5 System peripherals

? Power management module (PMC) with three power modes: Run, Wait, Stop

? Low-voltage detection (LVD) with reset or interrupt, selectable trip points

? Watchdog with independent clock source (WDOG)

? Programmable cyclic redundancy check module (CRC)

? Serial wire debug interface (SWD)

? Aliased SRAM bitband region (BIT-BAND)

? Bit manipulation engine (BME)

1.6 Security and integrity modules

? 80-bit unique identification (ID) number per chip

1.7 Human-machine interface

? Up to 71 general-purpose input/output (GPIO)

? Two 32-bit keyboard interrupt modules (KBI)

? External interrupt (IRQ)

1.8 Analog modules

? One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)

? Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

1.9 Timers

? One 6-channel FlexTimer/PWM (FTM)

? Two 2-channel FlexTimer/PWM (FTM)

? One 2-channel periodic interrupt timer (PIT)

? One pulse width timer (PWT)

? One real-time clock (RTC)

1.10 Communication interfaces

? Two SPI modules (SPI)

? Up to three UART modules (UART)

? Two I2C modules (I2C)

? One MSCAN module (MSCAN)

1.11 Package options

? 80-pin LQFP

? 64-pin LQFP