SH-2SH7047中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

Overview

The SH7047 group single-chip RISC (Reduced Instruction Set Computer) microprocessors integrate a Renesas-original RISC CPU core with peripheral functions required for system configuration.

The SH7047 group CPU has a RISC-type instruction set. Most instructions can be executed in one state (one system clock cycle), which greatly improves instruction execution speed. In addition, the 32-bit internal-bus architecture enhances data processing power. With this CPU, it has become possible to assemble low cost, high performance/high-functioning systems, even for applications that were previously impossible with microprocessors, such as real-time control, which demands high speeds.

In addition, the SH7047 group includes on-chip peripheral functions necessary for system configuration, such as large-capacity ROM and RAM, timers, a serial communication interface (SCI), Controller area network 2 (HCAN2), an A/D converter, an interrupt controller (INTC), and I/O ports. ROM and SRAM can be directly connected to the SH7047 MCU by means of an external memory access support function. This greatly reduces system cost.

Features

? Central processing unit with an internal 32-bit RISC (Reduced Instruction Set Computer) architecture

?- Instruction length: 16-bit fixed length for improved code efficiency

?- Load-store architecture (basic operations are executed between registers)

?- Sixteen 32-bit general registers

?- Five-stage pipeline

?- On-chip multiplier: multiplication operations (32 bits × 32 bits → 64 bits) executed in two to four cycles C language-oriented 62 basic instructions

? Various peripheral functions

?- Data transfer controller (DTC)

?- Multifunction timer/pulse unit (MTU)

?- Motor management timer(MMT)

?- Compare match timer (CMT)

?- Watchdog timer (WDT)

?- Asynchronous or clocked synchronous serial communication interface(SCI)

?- 10-bit A/D converter

?- Clock pulse generator

?- Controller area network2 (HCAN2)

?- User break controller (UBC)*

?- High-performance user debug interface (H-UDI) *

?- Advanced user debugger (AUD)*