SI2160-C60集成電路（IC）的視頻處理規格書PDF中文資料

SI2160-C60屬于集成電路（IC）的視頻處理。由美國思佳訊公司制造生產的SI2160-C60視頻處理一種集成電路 (IC) 半導體器件，設計用于在放大、增強、編碼器和解碼器（編解碼器）、緩沖、校準、處理、信號調節、調制與解調、轉換、傳輸、伽瑪校正、切換、OSD、數字化和多路復用等應用中處理音頻和/或視頻信號。

Description

The Si2160C integrates digital demodulators for all first and

second generation DVB standards (DVB-T/C/C2/S/S2 and S2X) in

a single advanced CMOS die. Leveraging Skyworks' proven digital

demodulation architecture, the Si2160C achieves excellent

reception performance for each media while significantly

minimizing front-end design complexity, cost, and power

dissipation. Connecting the Si2160C to a hybrid TV tuner or digital

only tuner, such as Skyworks' Si217x/5x/4x devices, results in a

high-performance and cost optimized TV or STB front-end

solution.

Skyworks' internally developed DVB-C2 demodulator can accept a

standard IF (36 MHz) or low-IF input (differential) and support all

modes specified by the DVB-C2 standard. The main features of

the DVB-C2 mode are 4096-QAM, 6 or 8 MHz bandwidth,

management of notch insertion (broadband and narrowband), and

support of multiple data slices and PLPs.

DVB-T, DVB-C2/C and DVB-S2/S demodulators are nextgeneration

enhanced versions of proven and broadly-used

Skyworks’ Si2169/68/67/66/64/62/60 devices.

The satellite reception allows demodulating widespread DVB-S,

DIRECTV? (DSS), DVB-S2, DIRECTV? (AMC) legacy

standards, and new Part II of DVB-S2 (S2X) satellite broadcast

standard. A zero-IF interface (differential) allows for a seamless

connection to market proven satellite silicon tuners. Si2160C

embeds DiSEqCTM 2.0 LNB interface for satellite dish control and

an equalizer to compensate for echoes in long cable feeds from

the antenna to the satellite tuner input.

The cable reception allows demodulating widely deployed DVB-C

legacy standard (ITU-T J.83 Annex A/C) and the Americas' cable

standard (ITU-T J.83 Annex B).

The Si2160C offers an on-chip blind scan algorithm for DVBS/

S2/S2X and DVB-C/C2 standards, as well as a blind lock

function. The Si2160C programmable transport stream output

interface provides a flexible range of output modes and is fully

compatible with all MPEG decoders or conditional access modules

to support any customer application.

Features

- Pin-to-pin compatible with all Si216x/8x single demods family

- API compatible with all single and dual demods families

- DVB-C2 (ETSI EN 302 769)

16-QAM to 4096-QAM OFDM demodulation

- DVB-S2 (ETSI EN 302 307-1 V1.4.1)

QPSK/8PSK demodulator

- DVB-S2X (ETSI EN302 307-2 V1.1.1)

QPSK/8PSK, 8/16/32APSKdemodulator

Roll-off factors from 0.05 to 0.35

- DVB-T (ETSI EN 300 744)

OFDM demodulator and enhanced FEC decoder

NorDig Unified 2.5 and D-Book 8 compliant

- DVB-C (ETSI EN 300 429) and ITU-T J.83 Annex A/B/C

QAM demodulator and FEC decoder

1 to 7.2 MSymbol/s

- DVB-S and DSS supported

QPSK demodulator and enhanced FEC decoder

- 1 to 45 MSymbol/s for all satellite standards (<40 MSps in

32APSK)

- LDPC and BCH FEC decoding for C2 and S2 standards

- I2C serial bus interfaces (master and host)

- Firmware control (embedded ROM/NVM)

- Upgradeable with patch download via fast SPI or I2C

(broadcast mode supported)

- Flexible TS output interface (serial, parallel, and slave)

- DiSEqCTM 2.0 interface and UnicableTM support for satellite

- Fast lock times for all media

- Low power consumption

- Two power supplies: 1.2 and 3.3 V

- 7x7 mm, QFN-48 pin package, Pb-free/RoHS compliant