SI9145集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器規格書PDF中文資料

SI9145屬于集成電路（IC）的PMIC-穩壓器-DCDC開關式控制器。由威世科技半導體制造生產的SI9145DC-DC 開關控制器PMIC（電源管理集成電路）DC 到 DC 開關式控制器是用于高效率電路的穩壓 IC，其配置為生成高于（突升或步升）或低于（突降或步降）輸入電源的輸出電源電壓。其他拓撲結構可能包括：降壓-升壓、反激、正激、Cuk、SEPIC、全橋、半橋和推挽式。這些器件不同于需要最小電壓并“燒盡”多余電壓的線性穩壓器。

FEATURES

2.7-V to 7-V Input Operating Range

Voltage-Mode PWM Control

High-Speed, Source-Sink Output Drive (200 mA)

Internal Oscillator (up to 2 MHz)

Standby Mode

0?100 Controllable Maximum Duty-Cycle

DESCRIPTION

The Si9145 switchmode controller IC is ideally suited for high

efficiency dc/dc converters in low input voltage systems.

Operation is guaranteed down to 2.7 V, with a minimum

start-up voltage of 3.0 V making the Si9145 ideal for use with

NiCd, NMH, and lithium ion battery packs. A mode select pin

allows the output driver polarity to be programmed allowing the

device to function as a step-up or step-down converter.

Features include a precision bandgap reference, a wide

bandwidth error amplifier, a 2-MHz oscillator, an input voltage

monitor with standby mode and a 200-mA output driver.

Supply current in normal operation is typically 1.1 mA and

250 A in standby mode.

The Si9145 implements conventional voltage mode control.

The maximum duty cycle in boost mode can be limited by

voltage on DMAX/SS pin. Frequency can be externally

programmed by selection of ROSC and COSC.

The Si9145 is available in both standard and lead (Pb)-free

16-pin SOIC and TSSOP packages and is specified over the

industrial temperature range (?25 C to 85 C).