SI9185集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

SI9185屬于集成電路（IC）的線性+開關穩壓器。由威世科技半導體制造生產的SI9185穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

FEATURES

? Input voltage 2 V to 6 V

? Low 150 mV dropout at 500 mA load

? Guaranteed 500 mA output current

? Uses low ESR ceramic output capacitor

? Fast load and line transient response

? Only 100 μVRMS noise with noise bypass capacitor

? 1 μA maximum shutdown current

? Built-in short circuit and thermal protection

? Out-of-regulation error flag (power good or POR)

? Fixed 1.215 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V, 5.0 V, or

adjustable output voltage options

? Other output voltages available by special order

? 1.1 W power dissipation

? Thin, thermally enhanced MLP33 PowerPAK? package

? Compliant to RoHS directive 2002/95/ECAPPLICATIONS

? Laptop and palm computers

? Desktop computers

? Cellular phones

? PDA, digital still cameras

DESCRIPTION

The Si9185 is a 500 mA CMOS LDO (low dropout) voltage

regulator. The device features ultra low ground current and

dropout voltage to prolong battery life in portable electronics.

The Si9185 offers line/load transient response and ripple

rejection superior to that of bipolar or BiCMOS LDO

regulators, and is designed to drive lower cost ceramic, as

well as tantalum, output capacitors. An external noise

bypass capacitor connected to the device’s CNOISE pin will

lower the LDO’s output noise for low noise applications. The

Si9185 also includes an out-of-regulation error flag. If a

capacitor is connected to the device’s delay pin, the error

flag output pin will generate a delayed power-on-reset

signal. The device is guaranteed stable from maximum load

current down to 0 mA load.

The Si9185 is available in both standard and lead (Pb)-free

MLP33 PowerPAK packages and is specified to operate

over the industrial temperature range of - 40 °C to 85 °C.

MLP33 PowerPAK packaging allows enhanced heat transfer

to the PC board.