SI9910集成電路（IC）的柵極驅動器規格書PDF中文資料

SI9910屬于集成電路（IC）的柵極驅動器。由威世科技半導體制造生產的SI9910柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

FEATURES

dv/dt and di/dt Control

Undervoltage Protection

Short-Circuit Protection

trr Shoot-Through Current Limiting

Low Quiescent Current

CMOS Compatible Inputs

Compatible with Wide Range of MOSFET Devices

Bootstrap and Charge Pump Compatible

(High-Side Drive)

DESCRIPTION

The Si9910 Power MOSFET driver provides optimized gate

drive signals, protection circuitry and logic level interface. Very

low quiescent current is provided by a CMOS buffer and a

high-current emitter-follower output stage. This efficiency

allows operation in high-voltage bridge applications with

“bootstrap” or “charge-pump” floating power supply

techniques.

The non-inverting output configuration minimizes current

drain for an n-channel “on” state. The logic input is internally

diode clamped to allow simple pull-down in high-side drives.

Fault protection circuitry senses an undervoltage or output

short-circuit condition and disables the power MOSFET.

Addition of one external resistor limits maximum di/dt of the

external Power MOSFET. A fast feedback circuit may be used

to limit shoot-through current during trr (diode reverse recovery

time) in a bridge configuration.

The Si9910 is available in both standard and lead (Pb)-free

8-pin plastic DIP and SOIC packages which are specified to

operate over the industrial temperature range of ?40 C to

85 C.