SKY66008-11-EVB開發板套件編程器的射頻評估開發套件開發板規格書PDF中文資料

SKY66008-11-EVB屬于開發板套件編程器的射頻評估開發套件開發板。由美國思佳訊公司制造生產的SKY66008-11-EVB射頻評估和開發套件，開發板本系列中的產品適用于在已知實施環境中，提供能訪問射頻相關器件的功能或者有助于訪問該功能。所含的焦點產品范圍從射頻信號鏈元器件（如放大器和檢測器）到模塊化收發器，以及不直接包含焦點產品的適配器硬件，但此類硬件可供方便地訪問用戶單獨提供的特定射頻產品或系列。

Applications

? Residential femtocells

? WCDMA, Band 8

? Small cells

Features

? Small signal gain: 28.5 dB

? ACLR at POUT = +19 dBm: -54 dBc

? PA on/off control

? I/O impedance internally matched to 50 Ω

? Single DC supply: 3.3 V to 4.6 V

? Minimal number of external components required

? Small footprint MCM (10-pin, 3 x 3 mm) package (MSL3, 260 °C per JEDEC J-STD-020)

Description

The SKY66008-11 linear power amplifier (PA) is a fully matched surface-mount module developed for WCDMA applications operating from 900 to 990 MHz. The device meets the stringent spectral linearity requirements of WCDMA femtocell applications with high power-added efficiency. An integrated directional coupler eliminates the need for any external coupler.

The GaAs MMIC contains all active amplifier circuitry, which includes input and interstage matching circuits. An output match into a 50 Ω load, realized off-chip within the module package, optimizes efficiency and power performance.

The SKY66008-11 is manufactured with Skyworks InGaP GaAs HBT process, which provides for all positive voltage DC supply operation and maintains high efficiency and good linearity. The primary bias to the device can be supplied directly from any suitable power supply with an output of 4.2 V. Power down is achieved by setting the VEN pin to 0 V. No external supply side switch is needed since typical “off” leakage is a few microamps with full primary voltage supplied from the main power supply.

The SKY66008-11 is packaged in a 10-pin, 3 x 3 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution.

A functional block diagram of the SKY66008-11 is shown in Figure 1. The 10-pin MCM package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.