SLR中文資料力特數(shù)據(jù)手冊PDF規(guī)格書

Description

The SLR Series has no isolation between the control switch

input and the solid-state output. Select the SLR for applications

where the control switch is the same voltage source as the

load. Provides the noiseless, reliability and long life of a

solid-state relay, without the cost of isolation circuitry. The

SLR Series offers random switching and is normally used for

inductive loads. When fully insulated female terminals are used

on the connection wires, the system meets the requirements

for touch-proof connections.

Operation

The solid-state output is located between terminals 1 and 2

and can be ordered as either normally open or normally closed,

when voltage is applied and S1 is open. When S1 is closed, the

solid-state output between terminals 1 and 2 closes (or opens).

If S1 is opened, the solid-state output will open (or close).

Reset: Opening S1 resets the output to its original state. Reset

is also accomplished by removing input voltage.