Description

The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features

? For surface mounted applications in order to optimize board space

? Low leakage

? Uni and Bidirectional unit

? Glass passivated junction

? Low inductance

? Excellent clamping capability

? 400W Peak power capability at 10 × 1000μs waveform Repetition rate

(duty cycle):0.01

? Fast response time: typically less than 1.0ps from 0 Volts to VBR min

? Typical IR less than 5μA above 12V

? High Temperature soldering: 260°C/40 seconds at terminals

? Typical maximum temperature coefficient ΔVBR = 0.1 ×

VBR@25°C× ΔT

? Plastic package has Underwriters Laboratory Flammability 94V-0

? Matte tin lead–free Plated

? Halogen free and RoHS compliant

? Typical failure mode is short from over-specified voltage or current

? Whisker test is conducted based on JEDEC JESD201A per its table

4a and 4c

? IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)

? ESD protection of data lines in accordance with IEC 61000-4-2

(IEC801-2)

? EFT protection of data lines in accordance with IEC 61000-4-4

(IEC801-4)

Applications

TVS devices are ideal for the protection of I/O interfaces,

VCC bus and other vulnerable circuits used in Telecom,

Computer, Industrial and Consumer electronic applications.