SN75115DR集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

SN75115DR屬于集成電路（IC）的驅動器接收器收發器。由德州儀器制造生產的SN75115DR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Choice of Open-Collector or Active Pullup

(Totem-Pole) Outputs

Single 5-V Supply

Differential Line Operation

Dual-Channel Operation

TTL Compatible

±15-V Common-Mode Input Voltage Range

Optional-Use Built-In 130-W Line-

Terminating Resistor

Individual Frequency-Response Controls

Individual Channel Strobes

Designed for Use With SN55113, SN75113,

SN55114, and SN75114 Drivers

Designed to Be Interchangeable With

National DS9615 Line Receivers

description

The SN55115 and SN75115 dual differential line

receivers are designed to sense small differential

signals in the presence of large common-mode

noise. These devices give TTL-compatible output

signals as a function of the differential input

voltage. The open-collector output configuration

permits the wire-ANDing of similar TTL outputs

(such as SN5401/SN7401) or other

SN55115/SN75115 line receivers. This permits a

level of logic to be implemented without extra

delay.

The output stages are similar to TTL totem-pole outputs, but with sink outputs, 1YS and 2YS, and the

corresponding active pullup terminals, 1YP and 2YP, available on adjacent package pins. The frequency

response and noise immunity may be provided by a single external capacitor. A strobe input is provided for each

channel. With the strobe in the low level, the receiver is disabled and the outputs are forced to a high level.

The SN55115 is characterized for operation over the full military temperature range of –55°C to 125°C. The

SN75115 is characterized for operation from 0°C to 70°C.