Features

? AEC-Q100 qualified

? High performance e200z4d dual core

– 32-bit Power Architecture technology CPU

– Core frequency as high as 140 MHz

– Dual issue 5-stage pipeline in-order

execution core

– Variable Length Encoding (VLE)

– Core MPU

– Floating Point, End-to-End Error Correction

– 8 KB instruction cache with error detection

code

– 32 KB local data RAM and 4 KB data cache

along with 8 KB instruction cache

? 1600 KB (1.5 MB code + 64 KB data) on-chip

flash memory: supports read during program

and erase operations, and multiple blocks

allowing EEPROM emulation

? 128 KB on-chip RAM (96 KB on chip

RAM + 32 KB local data RAM)

? Multi-channel direct memory access controller

(eDMA) with 32 channels

? Comprehensive new generation ASILD safety

concept

– ASILD SEooC approach (Safety Element

out of Context)

– FCCU for collection and reaction to failure

notifications

– Memory Error Management Unit (MEMU)

for collection and reporting of error events

in memories

– End-to-end Error Correction Code

(e2eECC) logic

– Cyclic redundancy check (CRC) unit

? 8 enhanced 12-bit SAR analog converters

– 2 sets of: 3 ADCs and one supervisor ADC

– 1.5 μs conversion time at 12 MHz

– Up to 32 physical channels

– Dual Programmable CTU

? 4 general purpose eTimer units (6 channels

each)

? 4 FlexPWM units

– 2 (4 channels each) used for motor control

with hardware synchronization between the

control systems

– 2 (2 channels each) used for SWG

emulation

? Communication interfaces

– 4 LINFlexD modules

– 4 deserial serial peripheral interface (DSPI)

modules

– 2 MCAN interfaces with advanced shared

memory scheme (808 x 32-bit words for

MCAN0 and 520 x 32-bit words for

MCAN1) and CAN-FD support

– 1 FlexRay module with 2 channels, 128

message buffers

– 2 SENT interfaces (3 channels each)

? Dual phase-locked loops with stable clock

domain for peripherals and FM modulation

domain for computational shell

? Nexus Class 3 debug and trace interface

? On-chip CAN/UART Bootstrap loader with

BAF. Physical Interface (PHY) can be UART

? Advanced and flexible supply scheme

– On-chip voltage regulator for 1.2 V core

logic supply. Bypass mode supported for

external 1.2 V core logic supply

– 3.3 V or 5 V IO and ADC supply (2

independent power domains available)

? Junction temperature range -40 °C to 150 °C

Description

The SPC574Sx is a family of next generation microcontrollers built on the Power

Architecture embedded category.

The SPC574Sx family of 32-bit microcontrollers is the latest achievement in integrated

automotive application controllers. It belongs to an expanding family of automotive-focused

products designed to address the next wave of Chassis and Safety electronics applications

within the vehicle. The advanced and cost-efficient host processor core of this automotive

controller family complies with the Power Architecture embedded category and only

implements the VLE (variable-length encoding) APU, providing improved code density. It

operates at speeds of up to 140 MHz and offers high performance processing optimized for

low power consumption. It capitalizes on the available development infrastructure of current

Power Architecture devices and is supported with software drivers, operating systems and

configuration code to assist with users implementations.