Features

? AEC-Q100 qualified

? 32-bit Power Architecture VLE compliant CPU

cores:

– Five enhanced main e200z4256n3 cores,

dual issue, two paired in lockstep

– Floating Point, End-to-End Error Correction

? 6576 KB (6288 KB code flash + 288 KB data

flash) on-chip flash memory:

– supports read during program and erase

operations, and multiple blocks allowing

EEPROM emulation

– Supports read while read between the two

code Flash partitions.

? 128 KB on-chip general-purpose SRAM (in

addition to 384 KB included in the CPUs)

? 96-channel direct memory access controller

(eDMA)

? Comprehensive new generation ASIL-D safety

concept

– ASIL-D of ISO 26262

– FCCU for collection and reaction to failure

notifications

– Memory Error Management Unit (MEMU)

for collection and reporting of error events

in memories

– Cyclic redundancy check (CRC) unit

? Junction temperature range -40 °C to 165 °C

? Dual-channel FlexRay controller

? Hardware Security Module (HSM)

? GTM344 - generic timer module

– Intelligent complex timer module

– 144 channels (48 input and 96 output)

– 5 programmable fine grain multi-threaded

cores

– 61 KB of dedicated RAM

– 24-bit wide channels

Enhanced analog-to-digital converter system

with:

– 1 supervisor 12-bit SAR analog converter

– 2 separate 10-bit SAR analog converter

– 4 separate fast 12-bit SAR analog

converters

– 6 separate 16-bit Sigma-Delta analog

converter with programmable decimation

filters

SAR ADC Queued digital interfaces for

individual channel ordering and command

sequencing

Communication interfaces

– 7 LINFlexD modules

– 8 deserial serial peripheral interface (DSPI)

modules

– 7 modular controller area network (MCAN)

modules, and one time-triggered controller

area network (M-TTCAN), all supporting

flexible data rate (ISO CAN-FD)

One Ethernet controller 10/100 Mbps,

compliant IEEE 802.3-2008

Flexible Power Supply options:

– External Regulators (1.2 V core, 3.3 V–5 V

IO)

– Single internal SMPS regulator

Nexus development interface (NDI) per

IEEEISTO 5001-2003 standard, with some

support for 2010 standard

Boot assist Flash (BAF) supports factory

programming using a serial bootload through

the asynchronous CAN or LIN/UART