SST25VF020集成電路（IC）的存儲(chǔ)器規(guī)格書PDF中文資料

PRODUCT DESCRIPTION

The SST serial flash family features a four-wire, SPI compatible interface that allows for a low pin-count pack age occupying less board space and ultimately lowering total system costs. SST25VF020 SPI serial flash memories are manufactured with SST’s proprietary, high performance CMOS SuperFlash Technology. The split-gate cell design and thick-oxide tunneling injector attain bette reliability and manufacturability compared with alternate approaches.

FEATURES:

? Single 2.7-3.6V Read and Write Operations

? Serial Interface Architecture

– SPI Compatible: Mode 0 and Mode 3

? 20 MHz Max Clock Frequency

? Superior Reliability

– Endurance: 100,000 Cycles (typical)

– Greater than 100 years Data Retention

? Low Power Consumption:

– Active Read Current: 7 mA (typical)

– Standby Current: 8 μA (typical)

? Flexible Erase Capability

– Uniform 4 KByte sectors

– Uniform 32 KByte overlay blocks

? Fast Erase and Byte-Program:

– Chip-Erase Time: 70 ms (typical)

– Sector- or Block-Erase Time: 18 ms (typical)

– Byte-Program Time: 14 μs (typical)

? Auto Address Increment (AAI) Programming

– Decrease total chip programming time over Byte-Program operations

? End-of-Write Detection

– Software Status

? Hold Pin (HOLD#)

– Suspends a serial sequence to the memory without deselecting the device

? Write Protection (WP#)

– Enables/Disables the Lock-Down function of the status register

? Software Write Protection

– Write protection through Block-Protection bits in status register

? Temperature Range

– Commercial: 0°C to +70°C

– Industrial: -40°C to +85°C

– Extended: -20°C to +85°C

? Packages Available

– 8-lead SOIC 150 mil body width

– 8-contact WSON (5mm x 6mm)

? All non-Pb (lead-free) devices are RoHS compliant