SST25VF032B-50-4C-S2AF中文資料SST數據手冊PDF規格書

PRODUCT DESCRIPTION

The SST 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SST25VF032B SPI serial flash memories are manufactured with SST’s proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

FEATURES:

? Single Voltage Read and Write Operations

– 2.7-3.6V

? Serial Interface Architecture

– SPI Compatible: Mode 0 and Mode 3

? High Speed Clock Frequency

– 80 MHz Max

? Superior Reliability

– Endurance: 100,000 Cycles (typical)

– Greater than 100 years Data Retention

? Low Power Consumption:

– Active Read Current: 10 mA (typical)

– Standby Current: 5 μA (typical)

? Flexible Erase Capability

– Uniform 4 KByte sectors

– Uniform 32 KByte overlay blocks

– Uniform 64 KByte overlay blocks

? Fast Erase and Byte-Program:

– Chip-Erase Time: 35 ms (typical)

– Sector-/Block-Erase Time: 18 ms (typical)

– Byte-Program Time: 7 μs (typical)

? Auto Address Increment (AAI) Word Programming

– Decrease total chip programming time over Byte-Program operations

? End-of-Write Detection

– Software polling the BUSY bit in Status Register

– Busy Status readout on SO pin

? Hold Pin (HOLD#)

– Suspends a serial sequence to the memory without deselecting the device

? Write Protection (WP#)

– Enables/Disables the Lock-Down function of the status register

? Software Write Protection

– Write protection through Block-Protection bits in status register

? Temperature Range

– Industrial: -40°C to +85°C

? Packages Available

– 8-lead SOIC (200 mils)

– 8-contact WSON (5 X 6 mm)

? All devices are RoHS compliant