SST25VF040B-50-4C-QAF集成電路（IC）的存儲器規(guī)格書PDF中文資料

PRODUCT DESCRIPTION

The 25 series Serial Flash family features a four-wire, SPI compatible interface that allows for a low pin-count pack age which occupies less board space and ultimately lowers total system costs. The SST25VF040B devices are enhanced with improved operating frequency and even lower power consumption.

FEATURES:

? Single Voltage Read and Write Operations

– 2.7-3.6V

? Serial Interface Architecture

– SPI Compatible: Mode 0 and Mode 3

? High Speed Clock Frequency

– Up to 50/80 MHz

? Superior Reliability

– Endurance: 100,000 Cycles (typical)

– Greater than 100 years Data Retention

? Low Power Consumption:

– Active Read Current: 10 mA (typical)

– Standby Current: 5 μA (typical)

? Flexible Erase Capability

– Uniform 4 KByte sectors

– Uniform 32 KByte overlay blocks

– Uniform 64 KByte overlay blocks

? Fast Erase and Byte-Program:

– Chip-Erase Time: 35 ms (typical)

– Sector-/Block-Erase Time: 18 ms (typical)

– Byte-Program Time: 7 μs (typical)

? Auto Address Increment (AAI) Programming

– Decrease total chip programming time over

Byte-Program operations

? End-of-Write Detection

– Software polling the BUSY bit in Status Register

– Busy Status readout on SO pin in AAI Mode

? Hold Pin (HOLD#)

– Suspends a serial sequence to the memory

without deselecting the device

? Write Protection (WP#)

– Enables/Disables the Lock-Down function of the

status register

? Software Write Protection

– Write protection through Block-Protection bits in

status register

? Temperature Range

– Commercial: 0°C to +70°C

– Industrial: -40°C to +85°C

? Packages Available

– 8-lead SOIC (200 mils)

– 8-lead SOIC (150 mils)

– 8-contact WSON (6mm x 5mm)

? All devices are RoHS compliant