SST55LD019M-45-C-MVWE中文資料SST數(shù)據(jù)手冊PDF規(guī)格書

PRODUCT DESCRIPTION

SST’s ATA Flash Disk Controller is the heart of a high performance, flash media-based data storage system.

The ATA Flash Disk Controller recognizes the control, address, and data signals on the ATA/IDE bus and trans lates them into memory accesses to the standard NAND type flash media. The SST55LD019M device supports Multi-Level Cell (MLC) and high density Single-Level Cell (SLC) flash media. This technology suits solid state mass storage applications offering new, expanded functionality while enabling smaller, lighter designs with lower power consumption.

FEATURES:

? Industry Standard ATA/IDE Bus Interface

– Host Interface: 8- or 16-bit access

– Supports up to PIO Mode-4

– Supports up to Multi-word DMA Mode-2

? Interface for standard NAND Flash Media

– Flash Media Interface: 8-bit or 16-bit access

- Supports up to 8 flash media devices directly

- Supports up to 64 flash media devices with

external decoding logic

– Supports Multi-Level Cell (MLC) and high

density Single-Level Cell (SLC) flash media

- 2 KByte program page size only

? Low power, 3.3V core operation

? 5.0V or 3.3V host interface through VDDQpins

? Low current operation:

– Active mode: 25 mA/35 mA (3.3V/5.0V) (typical)

– Sleep mode: 40 μA/50 μA (3.3V/5.0V) (typical)

? Power Management Unit

– Immediate disabling of unused circuitry

? Expanded Data Protection

– WP_PD# pin configurable by firmware for

prevention of data overwrites

? 20-byte Unique ID for Enhanced Security

– Factory Pre-programmed 10-byte Unique ID

– User-Programmable 10-byte ID

? Integrated Voltage Detector

– Industrial Controller requires external POR# signal

? Pre-programmed Embedded Firmware

– Performs self-initialization on first system Power-on

– Executes industry standard ATA/IDE commands

– Implements dynamic wear-leveling algorithms to

substantially increase the longevity of flash media

– Embedded Flash File System

– Built-in ECC corrects up to 3 random 12-bit

symbols of error per 512-byte sector

? Internal or External System Clock Option

? Multi-tasking Technology enables Fast

Sustained Write Performance (Host to Flash)

– Up to 10MB/sec

? Fast Sustained Read Performance (Flash to Host)

– Up to 10 MB/sec

? Automatic Recognition and Initialization of

Flash Media Devices

– Seamless integration into a standard SMT

manufacturing process

– 5 sec. (typical) for flash drive recognition and

setup

? Commercial and Industrial Temperature Ranges

– 0°C to 70°C for commercial operation

– -40°C to +85°C for industrial operation

? Packages Available

– 100-lead TQFP – 16mm x 16mm

– 84-ball TFBGA – 9mm x 9mm

– 85-ball VFBGA – 6mm x 6mm

? All non-Pb (lead-free) devices are RoHS compliant