ST72622L2M1中文資料意法半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

INTRODUCTION

The ST7262 and ST72F62 devices are members of the ST7 microcontroller family designed for USB applications.

All devices are based on a common industry standard 8-bit core, featuring an enhanced instruction set.

The ST7262 devices are ROM versions.

The ST72F62 versions feature dual-voltage FLASH memory with FLASH Programming capability.

Under software control, all devices can be placed in WAIT, SLOW, or HALT mode, reducing power consumption when the application is in idle or standby state.

The enhanced instruction set and addressing modes of the ST7 offer both power and flexibility to software developers, enabling the design of highly efficient and compact application code. In addition to standard 8-bit data management, all ST7 microcontrollers feature true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.

■ Memories

– 8K or 16K Program memory (ROM or Dual voltage FLASH) with read-write protection

– In-Application and In-Circuit Programming for FLASH versions

– 384 to 768 bytes RAM (128-byte stack)

■ Clock, Reset and Supply Management

– Enhanced Reset System (Power On Reset)

– Low Voltage Detector (LVD)

– Clock-out capability

– 6 or 12 MHz Oscillator (8, 4, 2, 1 MHz internal frequencies)

– 3 Power saving modes

■ USB (Universal Serial Bus) Interface

– DMA for low speed applications compliant with USB specification (version 2.0):

– Integrated 3.3V voltage regulator and trans ceivers

– Suspend and Resume operations

– 3 Endpoints

■ Up to 31 I/O Ports

– Up to 31 multifunctional bidirectional I/O lines

– Up to 12 External interrupts (3 vectors)

– 13 alternate function lines

– 8 high sink outputs (8 mA@0.4 V/20 mA@1.3 V)

– 2 true open drain pins (N buffer 8 mA@0.4 V)

■ 3 Timers

– Configurable watchdog timer (8 to 500 ms timeout)

– 8-bit Auto Reload Timer (ART) with 2 Input Captures, 2 PWM outputs and External Clock

– 8-bit Time Base Unit (TBU) for generating periodic interrupts cascadable with ART

■ Analog Peripheral

– 10-bit A/D Converter with up to 8 input pins.

■ 2 Communications Interfaces

– Asynchronous Serial Communication interface

– Synchronous Serial Peripheral Interface

■ Instruction Set

– 8-bit data manipulation

– 63 basic instructions

– 17 main addressing modes

– 8 x 8 unsigned multiply instruction

– True bit manipulation

■ Nested interrupts

■ Development Tools

– Full hardware/software development package