ST8024LCDR集成電路（IC）的專用規格書PDF中文資料

ST8024LCDR屬于集成電路（IC）的專用。由意法半導體集團制造生產的ST8024LCDR專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。

Description

The ST8024L is a complete low-cost analog interface for asynchronous Class A, B, and C smartcards. It can be placed between the card and the microcontroller with few external components to perform all supply protection and control functions. The ST8024LCDR and ST8024LCTR are compatible with the ST8024 (with the exception of Vth(ext)rise/fall value).

Features

■ Designed to be compatible with the NDS conditional access system (except ST8024LTR)

■ ISO 7816, GSM11.11 and EMV 4.2(payment systems) compatible

■ IC card interface

■ 3 V or 5 V supply for the ST8024L device (VDD)

■ Three specifically protected half-duplex bi-directional buffered I/O lines to card contacts C4, C7 and C8

■ Step-up converter for VCCgeneration separately powered by a 5 V ± 20 supply (VDDPand PGND)

■ 1.8 V ± 6.5, 3 V or 5 V ± 5 regulated card supply voltage (VCC) with appropriate decoupling has the following capabilities:

–ICC< 80 mA at VDDP= 4.75 to 6.5 V

– Handles current spikes of 40 nA up to 20 MHz

– Controls rise and fall times

– Filtered overload detection at ~120 mA

■ Thermal and short-circuit protection on all card contacts

■ Automatic activation and deactivation sequences; initiated by software or by hardware in the event of a short-circuit, card

take-off, overheating, VDDor VDDPdropout

■ Enhanced ESD protection on card side (>6 kV)

■ 26 MHz integrated crystal oscillator

■ Built-in debounce on card presence contacts

■ One multiplexed status signal OFF

■ Non-inverted control of RST via pin RSTIN

■ Clock generation for cards up to 20 MHz (divided by 1, 2, 4 or 8 through CLKDIV1 and CLKDIV2 signals) with synchronous frequency changes

■ Supply supervisor for spike-killing during power-on and power-off and power-on reset (threshold fixed internally or externally by a resistor divider)

Applications

■ Smartcard readers for set-top boxes

■ IC card readers for banking

■ Identification, pay TV