STA8089FGARF/IF射頻/中頻RFID的射頻接收器規格書PDF中文資料

STA8089FGA屬于RF/IF射頻/中頻RFID的射頻接收器。由意法半導體集團制造生產的STA8089FGA射頻接收器RF 接收器用于接收已調制的射頻信號并對其進行解調，然后將數據傳送到系統中進行處理。頻率范圍是 AM、FM、WB、0 Hz 至 64 GHz，數據速率為 250 bps 至 16 Gbps，數據接口包括連接器、I2C、I2S、引腳焊盤、并行、PCB、串行、焊盤、SPI、UART 和 USB。

Features

? AEC-Q100 qualified

? STMicroelectronics? positioning receiver with

48 tracking channels and 2 fast acquisition

channels supporting GPS, Galileo, GLONASS,

BeiDou and QZSS systems

? ST-DRAW (Dead Reckoning Automotive Way)

supported (STA8089FGAD only)

? Pin to pin compatible with STA8088FG

? Single die standalone receiver embedding RF

Front-End and low noise amplifier

? -162 dBm indoor sensitivity (tracking mode)

? Fast TTFF < 1 s in Hot start and 30 s in Cold

Start

? High performance ARM946 MCU (up to

196 MHz)

? 256 Kbyte embedded SRAM

? In-package SQI Flash Memory (16 Mbits)

? Real Time Clock (RTC) circuit

? 32-bit Watch-dog timer

? 3 UARTs

? 1 I2C master interface

? 1 Synchronous Serial Port (SSP, Motorola-SPI

supported)

? USB2.0 full speed (12 MHz) with integrated

physical layer transceiver

? 2 Controller Area Network (CAN)

? 2 channels ADC (10 bits)

? Operating condition:

– Main voltage regulator (VINL ): 1.8 V ± 5

– Backup voltage (VINB ): 1.6 V to 4.3 V

– Digital voltage (VDD ): 1.1 V to 1.32 V

– RF core voltage (VCC): 1.2 V ± 10

– IO Ring Voltage (VddIO): 1.8 V ± 5 or

3.3 V ± 10

? Package:

– VFQFPN56 (7 x 7 x 1.0 mm) 0.4 mm pitch

? Ambient temperature range: -40/+85°C

Description

STA8089FGA belongs to Teseo III family products. The device is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).

STA8089FGA is compliant with ST Automotive Grade qualification which includes in addition to AEC-Q100 requirements a set of production flow methodologies targeting zero defect per million.

The device is backward compatible with STA8088FG, this enables fast customer application migration.

The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories.

STA8089FGAD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.