STEF512PUR集成電路（IC）的電流調節/管理規格書PDF中文資料

STEF512PUR屬于集成電路（IC）的電流調節/管理。由意法半導體集團制造生產的STEF512PUR電流調節/管理電流調節和管理 IC 是用于監視和調節電路電流的半導體器件。功能包括電流表、限流、電流鏡、電流監控器、電流調節器、電流紋波抑制器、電流檢測、電流源、電流開關和電子保險絲，電流輸出從 100 μA 至 50 A 可調。

Features

? 5 V and 12 V channels into one chip

? Output over voltage clamp

? Fixed current limit : 3 A on 5 V, 4 A on 12 V

? Latched-off thermal protection

? Input undervoltage lockout

? Adjustable output voltage slew rate for each channel

? Integrated 40 mΩ Power FETs

? SAS disable pin

? Current monitor output

? QFN10-2x3 package

Applications

? HD and SSD drives

? Set-top boxes

? DVD and Blu-ray disc drivers

Description

The STEF512PUR is an integrated dual electronic eFuse, designed to protect

circuitry on the output from overcurrent and overvoltage events, in those applications

requiring hot swap operation and in-rush current control.

The device embeds two independent electronic fuses, one for the 5 V rails and one

for the 12 V rails. Thanks to the very low ON-resistance of the integrated power

FETs, the voltage drop from the main supply to the load is very low during normal

operation.

The startup time can be adjusted by the user for each eFuse, via two small soft-start

capacitors, connected to the relevant pins.

In this way the inrush current at startup can be kept under control.

The maximum load current is precisely limited, by utilizing a sense FET topology, to

factory-defined values (3 A for 5 V output and 4 A for 12 V output).

The device also provides precise overvoltage clamp for each channel, preventing the

load being damaged from power supply failures, and undervoltage lockout (UVLO),

assuring that the input voltage is above the minimum operating threshold, before the

power device is turned on.

When an overload condition occurs, the STEF512PUR limits the output current to the

predefined safe value. If the anomalous overload condition persists, the device goes

into thermal shutdown, the internal switch is opened and the load disconnected from

the power supply.

In the QFN10 package two current monitor pins are available, providing continuous

information on the load current for each channel.