STHV748S集成電路（IC）的電源管理-專用規格書PDF中文資料

STHV748S屬于集成電路（IC）的電源管理-專用。由意法半導體集團制造生產的STHV748S電源管理 - 專用專用型電源管理集成電路 (PMIC) 用于電源的控制或操作，適合特定或小范圍的目標應用，例如汽車氣囊管理、電容器組平衡、AC 公共電力監控、存儲器總線端接、接地故障檢測、能量收集、小型引擎管理、處理器或芯片集專用電壓調節、負載突降保護、觸覺驅動器、熱電制冷器控制等。

Features

? Pinout compatibility with STHV748

? Recirculation current protection

? 0 to ±90 V output voltage

? Up to 20 MHz operating frequency

? Embedded low-power, floating high-voltage drivers (external voltage rails can be also used)

? Mode operations:

? 3/5-level output waveform

? ±2 A source and sink current

? Down to ≤ 20 ps jitter

? Anti-cross conduction function

? Low 2nd harmonic distortion

? Fully integrated clamping-to-ground function

? 8 Ω synchronous active clamp

? Anti-leakage on output node

? Dedicated half bridge for continuous wave (CW) operations

? ≤ 0.1 W power consumption

? ±0.6 A source and sink current

? 205 fs RMS jitter [100 Hz-20 kHz]

Description

This monolithic, high-voltage, high-speed pulser generator features four independent

channels. It is designed for medical ultrasound imaging applications, but can also be used

to drive piezoelectric, capacitive or MEMS based transducers.

The STHV748S is composed of a controller logic interface circuit, level translators,

MOSFET gate drivers, noise blocking diodes, and high-power P-channel and N-channel

MOSFETs as the output stage for each channel. It also includes clamping-to-ground

circuitry, anti-leakage, anti-memory effect block, thermal sensor, and a T/R switch which

guarantees effective decoupling during the transmission phase. The STHV748S also

includes self-biasing and thermal shutdown blocks.

Each channel can support up to five active output levels with two half bridges. The output

stage of each channel is able to provide ±2 A peak output current. In order to reduce power

dissipation during continuous wave mode, a dedicated half-bridge is available and the peak

current is limited to 0.6 A.

An ESD reinforced structure was developed to prevent high voltage overshoots and inrush

current due to cabled transducer reflections. Each HV output is supported by a dedicate HV

diode network to withstand possible reflections, mitigating excessive voltage overshoot that

could lead to device damage.

Applications

? Medical ultrasound imaging

? Pulse waveform generators

? NDT ultrasound transmission

? Piezoelectric transducer drivers