STK672-440A-E集成電路（IC）的電機驅(qū)動器控制器規(guī)格書PDF中文資料

Overview

The STK672-440A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.

Features

? Built-in overcurrent detection function (output current OFF).

? Built-in overheat detection function (output current OFF).

? If either over-current or overheat detection function is activated,

the FAULT1 signal (active low) is output.

The FAULT2 signal is used to output the result of activation of

protection circuit detection at 2 levels.

? Built-in power on reset function.

? A micro-step sine wave-driven driver can be activated merely by inputting an external clock.

? External pins can be used to select 2, 1-2 (including pseudo-micro),

W1-2, 2 W1-2, or 4W1-2 excitation.

? The switch timing of the 4-phase distributor can be switched

by setting an external pin (MODE3) to detect either the

rise and fall, or rise only, of CLOCK input.

? Phase is maintained even when the excitation mode is switched.

Rotational direction switching function.

? Supports schmitt input for 2.5V high level input.

? Incorporating a current detection resistor (0.122Ω: resistor tolerance ±2),

motor current can be set using two external resistors.

? The ENABLE pin can be used to cut output current while maintaining the excitation mode.

? With a wide current setting range, power consumption can be reduced during standby.

? No motor sound is generated during hold mode due to external excitation current control.

? A external excitation system is used for PWM operations.

Fixed current control for shifting the phase of Ach/Bch is

used for the PWM phase.

Applications

? Office photocopiers, printers, etc.