Features

? Core: Arm? 32-bit Cortex?-M0+ CPU,

frequency up to 64 MHz

? -40°C to 85°C/105°C/125°C operating

temperature

? Memories

– Up to 64 Kbytes of Flash memory with

protection and securable area

– 18 Kbytes of SRAM (16 Kbytes with HW

parity check)

? CRC calculation unit

? Reset and power management

– Voltage range: 1.7 V to 3.6 V

– Power-on/Power-down reset (POR/PDR)

– Programmable Brownout reset (BOR)

– Programmable voltage detector (PVD)

– Low-power modes:

Sleep, Stop, Standby, Shutdown

– VBAT supply for RTC and backup registers

? Clock management

– 4 to 48 MHz crystal oscillator

– 32 kHz crystal oscillator with calibration

– Internal 16 MHz RC with PLL option

– Internal 32 kHz RC oscillator (±5 )

? Up to 44 fast I/Os

– All mappable on external interrupt vectors

– Multiple 5 V-tolerant I/Os

? 7-channel DMA controller with flexible mapping

? 12-bit, 0.4 μs ADC (up to 16 ext. channels)

– Up to 16-bit with hardware oversampling

– Conversion range: 0 to 3.6V

? Two 12-bit DACs, low-power sample-and-hold

? Two fast low-power analog comparators, with

programmable input and output, rail-to-rail

? 14 timers(two 128 MHz capable): 16-bit for

advanced motor control, one 32-bit and five 16-

bit general-purpose, two basic 16-bit, two lowpower

16-bit, two watchdogs, SysTick timer

? Calendar RTC with alarm and periodic wakeup

from Stop/Standby/Shutdown

? Communication interfaces

– Two I2

C-bus interfaces supporting Fastmode

Plus (1 Mbit/s) with extra current

sink, one supporting SMBus/PMBus and

wakeup from Stop mode

– Two USARTs with master/slave

synchronous SPI; one supporting ISO7816

interface, LIN, IrDA capability, auto baud

rate detection and wakeup feature

– One low-power UART

– Two SPIs (32 Mbit/s) with 4- to 16-bit

programmable bitframe, one multiplexed

with I2S interface

? Development support: serial wire debug (SWD)

? 96-bit unique ID

? All packages ECOPACK 2 compliant

Description

The STM32G051x6/x8 mainstream microcontrollers are based on high-performance

Arm? Cortex?-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high

level of integration, they are suitable for a wide range of applications in consumer, industrial

and appliance domains and ready for the Internet of Things (IoT) solutions.

The devices incorporate a memory protection unit (MPU), high-speed embedded memories

(18 Kbytes of SRAM and up to 64 Kbytes of Flash program memory with read protection,

write protection, proprietary code protection, and securable area), DMA, an extensive range

of system functions, enhanced I/Os, and peripherals. The devices offer standard

communication interfaces (two I2Cs, two SPIs / one I2S, and two USARTs), one 12-bit ADC

(2.5 MSps) with up to 19 channels, one 12-bit DAC with two channels, two fast comparators,

an internal voltage reference buffer, a low-power RTC, an advanced control PWM timer

running at up to double the CPU frequency, five general-purpose 16-bit timers with one

running at up to double the CPU frequency, a 32-bit general-purpose timer, two basic timers,

two low-power 16-bit timers, two watchdog timers, and a SysTick timer.

The devices operate within ambient temperatures from -40 to 125°C and with supply

voltages from 1.7 V to 3.6 V. Optimized dynamic consumption combined with a

comprehensive set of power-saving modes, low-power timers and low-power UART, allows

the design of low-power applications.

VBAT direct battery input allows keeping RTC and backup registers powered.

The devices come in packages with 20 to 48 pins.