STM32G473MC中文資料意法半導體數據手冊PDF規格書

Features

? Includes ST state-of-the-art patented

technology

? Core: Arm? 32-bit Cortex?-M4 CPU with FPU,

Adaptive real-time accelerator (ART

Accelerator) allowing 0-wait-state execution

from Flash memory, frequency up to 170 MHz

with 213 DMIPS, MPU, DSP instructions

? Operating conditions:

– VDD, VDDA voltage range:

1.71 V to 3.6 V

? Mathematical hardware accelerators

– CORDIC for trigonometric functions

acceleration

– FMAC: filter mathematical accelerator

? Memories

– 512 Kbytes of Flash memory with ECC

support, two banks read-while-write,

proprietary code readout protection

(PCROP), securable memory area, 1 Kbyte

OTP

– 96 Kbytes of SRAM, with hardware parity

check implemented on the first 32 Kbytes

– Routine booster: 32 Kbytes of SRAM on

instruction and data bus, with hardware

parity check (CCM SRAM)

– External memory interface for static

memories FSMC supporting SRAM,

PSRAM, NOR and NAND memories

– Quad-SPI memory interface

? Reset and supply management

– Power-on/power-down reset

(POR/PDR/BOR)

– Programmable voltage detector (PVD)

– Low-power modes: sleep, stop, standby

and shutdown

– VBAT supply for RTC and backup registers

? Clock management

– 4 to 48 MHz crystal oscillator

– 32 kHz oscillator with calibration

– Internal 16 MHz RC with PLL option (± 1%)

– Internal 32 kHz RC oscillator (± 5%)

? Up to 107 fast I/Os

– All mappable on external interrupt vectors

– Several I/Os with 5 V tolerant capability

? Interconnect matrix

? 16-channel DMA controller

? 5 x 12-bit ADCs 0.25 μs, up to 42 channels.

Resolution up to 16-bit with hardware

oversampling, 0 to 3.6 V conversion range

? 7 x 12-bit DAC channels

– 3 x buffered external channels 1 MSPS

– 4 x unbuffered internal channels 15 MSPS

? 7 x ultra-fast rail-to-rail analog comparators

? 6 x operational amplifiers that can be used in

PGA mode, all terminals accessible

? Internal voltage reference buffer (VREFBUF)

supporting three output voltages (2.048 V,

2.5 V, 2.9 V)

? 14 timers:

– 2 x 32-bit timer and 2 x 16-bit timers with

up to four IC/OC/PWM or pulse counter

and quadrature (incremental) encoder input

– 3 x 16-bit 8-channel advanced motor

control timers, with up to 8 x PWM

channels, dead time generation and

emergency stop

– 1 x 16-bit timer with 2 x IC/OCs, one

OCN/PWM, dead time generation and

emergency stop

– 2 x 16-bit timers with IC/OC/OCN/PWM,

dead time generation and emergency stop

– 2 x watchdog timers (independent, window)

– 1 x SysTick timer: 24-bit downcounter

– 2 x 16-bit basic timers

– 1 x low-power timer

? Calendar RTC with alarm, periodic wakeup

from stop/standby

? Communication interfaces

– 3 x FDCAN controller supporting flexible

data rate

– 4 x I2C Fast mode plus (1 Mbit/s) with

20 mA current sink, SMBus/PMBus,

wakeup from stop

– 5 x USART/UARTs (ISO 7816 interface,

LIN, IrDA, modem control)

– 1 x LPUART

– 4 x SPIs, 4 to 16 programmable bit frames,

2 x with multiplexed half duplex I2S

interface

– 1 x SAI (serial audio interface)

– USB 2.0 full-speed interface with LPM and

BCD support

– IRTIM (infrared interface)

– USB Type-C? /USB power delivery

controller (UCPD)

? True random number generator (RNG)

? CRC calculation unit, 96-bit unique ID

? Development support: serial wire debug

(SWD), JTAG, Embedded Trace Macrocell?