Features

Includes ST state-of-the-art patented technology

Core

? 32-bit Arm? Cortex?-M7 core with double-precision FPU and L1 cache:

16 Kbytes of data and 16 Kbytes of instruction cache allowing to fill one cache

line in a single access from the 128-bit embedded flash memory; frequency up

to 280 MHz, MPU, 599 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP

instructions

Memories

? 2 Mbytes of flash memory with read while write support, plus 1 Kbyte of OTP

memory

? ~1.4 Mbytes of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM +

128 Kbytes of DTCM RAM for time critical routines), 1.18 Mbytes of user SRAM,

and 4 Kbytes of SRAM in Backup domain

? 2x Octo-SPI memory interfaces with on-the-fly decryption, I/O multiplexing and

support for serial PSRAM/NOR, Hyper RAM/flash frame formats, running up to

140 MHz in SRD mode and up to 110 MHz in DTR mode

? Flexible external memory controller with up to 32-bit data bus:

– SRAM, PSRAM, NOR flash memory clocked up to 125 MHz in

Synchronous mode

– SDRAM/LPSDR SDRAM

– 8/16-bit NAND flash memories

? CRC calculation unit

Security

? ROP, PC-ROP, active tamper, secure firmware upgrade support, Secure access

mode

General-purpose input/outputs

? Up to 168 I/O ports with interrupt capability

– Fast I/Os capable of up to 133 MHz

– Up to 164 5-V-tolerant I/Os

Low-power consumption

? Stop: down to 32 μA with full RAM retention

? Standby: 2.8 μA (Backup SRAM OFF, RTC/LSE ON, PDR OFF)

? VBAT: 0.8 μA (RTC and LSE ON)

Clock management

? Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI

? External oscillators: 4-50 MHz HSE, 32.768 kHz LSE

? 3× PLLs (1 for the system clock, 2 for kernel clocks) with fractional mode

Reset and power management

? 2 separate power domains, which can be independently clock gated to maximize power efficiency:

– CPU domain (CD) for Arm? Cortex? core and its peripherals, which can be independently switched in

Retention mode

– Smart run domain (SRD) for reset and clock control, power management and some peripherals

? 1.62 to 3.6 V application supply and I/Os

? POR, PDR, PVD and BOR

? Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs

? Dedicated SDMMC power supply

? High power efficiency SMPS step-down converter regulator to directly supply VCORE or an external circuitry

? Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry

? Voltage scaling in Run and Stop mode

? Backup regulator (~0.9 V)

? Low-power modes: Sleep, Stop and Standby

? VBAT battery operating mode with charging capability

? CPU and domain power state monitoring pins

Interconnect matrix

? 3 bus matrices (1 AXI and 2 AHB)

? Bridges (5× AHB2APB, 3× AXI2AHB)

5 DMA controllers to unload the CPU

? 1× high-speed general-purpose master direct memory access controller (MDMA)

? 2× dual-port DMAs with FIFO and request router capabilities

? 1× basic DMA with request router capabilities

? 1x basic DMA dedicated to DFSDM

Up to 35 communication peripherals

? 4× I2C FM+ interfaces (SMBus/PMBus)

? 5× USART/5x UARTs (ISO7816 interface, LIN, IrDA, modem control) and 1x LPUART

? 6× SPIs, including 4 with muxed full-duplex I2S audio class accuracy via internal audio PLL or external clock

and 1 x SPI/I2S in LP domain (up to 125 MHz)

? 2x SAIs (serial audio interface)

? SPDIFRX interface

? SWPMI single-wire protocol master interface

? MDIO Slave interface

? 2× SD/SDIO/MMC interfaces (up to 133 MHz)

? 2× CAN controllers: 2 with CAN FD, 1 with time-triggered CAN (TT-CAN)

? 1× USB OTG interfaces (1HS/FS)

? HDMI-CEC

? 8- to 14-bit camera interface up to 80 MHz

? 8-/16-bit parallel synchronous data input/output slave interface (PSSI)

11 analog peripherals

? 2× ADCs with 16-bit max. resolution (up to 24 channels, up to 3.6 MSPS)

? 1× analog and 1x digital temperature sensors

? 1× 12-bit single-channel DAC (in SRD domain) + 1× 12-bit dual-channel DAC

? 2× ultra-low-power comparators

? 2× operational amplifiers (8 MHz bandwidth)

? 2× digital filters for sigma delta modulator (DFSDM), 1x with 8 channels/8 filters and 1x in SRD domain with 2

channels/1 filter

Graphics

? LCD-TFT controller up to XGA resolution

? Chrom-ART graphical hardware Accelerator (DMA2D) to reduce CPU load

? Hardware JPEG Codec

? Chrom-GRC? (GFXMMU)

Up to 19 timers and 2 watchdogs

? 2× 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input (up to

280 MHz)

? 2× 16-bit advanced motor control timers (up to 280 MHz)

? 10× 16-bit general-purpose timers (up to 280 MHz)

? 3× 16-bit low-power timers (up to 280 MHz)

? 2× watchdogs (independent and window)

? 1× SysTick timer

? RTC with sub-second accuracy and hardware calendar

Cryptographic acceleration

? AES chaining modes: ECB,CBC,CTR,GCM,CCM for 128, 192 or 256

? HASH (MD5, SHA-1, SHA-2), HMAC

? 2x OTFDEC AES-128 in CTR mode for Octo-SPI memory encryption/decryption

? 1x 32-bit, NIST SP 800-90B compliant, true random generator

Debug mode

? SWD and JTAG interfaces

? 4 KB Embedded Trace Buffer

96-bit unique ID

All packages are ECOPACK2 compliant