STM32L082CBU3DTR中文資料意法半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

Features

Includes ST state-of-the-art patented

technology

? Ultra-low-power platform

– 1.65 V to 3.6 V power supply

– -40 to 125 °C temperature range

– 0.29 μA Standby mode (3 wakeup pins)

– 0.43 μA Stop mode (16 wakeup lines)

– 0.86 μA Stop mode + RTC + 20-Kbyte

RAM retention

– Down to 93 μA/MHz in Run mode

– 5 μs wakeup time (from Flash memory)

– 41 μA 12-bit ADC conversion at 10 ksps

? Core: Arm? 32-bit Cortex?-M0+ with MPU

– From 32 kHz up to 32 MHz max.

– 0.95 DMIPS/MHz

? Memories

– Up to 192-Kbyte Flash memory with ECC

(2 banks with read-while-write capability)

– 20-Kbyte RAM

– 6 Kbytes of data EEPROM with ECC

– 20-byte backup register

– Sector protection against R/W operation

? Up to 40 fast I/Os (34 I/Os 5V tolerant)

? Reset and supply management

– Ultra-safe, low-power BOR (brownout

reset) with 5 selectable thresholds

– Ultra-low-power POR/PDR

– Programmable voltage detector (PVD)

? Clock sources

– 1 to 25 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– High speed internal 16 MHz factorytrimmed

RC (+/- 1)

– Internal low-power 37 kHz RC

– Internal multispeed low-power 65 kHz to

4.2 MHz RC

– Internal self calibration of 48 MHz RC for

USB

– PLL for CPU clock

? Pre-programmed bootloader

– USB, USART supported

? Development support

– Serial wire debug supported

? Rich Analog peripherals

– 12-bit ADC 1.14 Msps, up to 13 channels

(down to 1.65 V)

– 2 x 12-bit channel DACs with output buffers

(down to 1.8 V)

– 2x ultra-low-power comparators (window

mode and wake up capability, down to

1.65 V)

? Up to 19 capacitive sensing channels

supporting touchkey, linear and rotary touch

sensors

? 7-channel DMA controller, supporting ADC,

SPI, I2C, USART, DAC, Timers, AES

? 11x peripheral communication interfaces

– 1x USB 2.0 crystal-less, battery charging

detection and LPM

– 4x USART (2 with ISO 7816, IrDA), 1x

UART (low power)

– Up to 6x SPI 16 Mbits/s

– 3x I2C (2 with SMBus/PMBus)

? 11x timers: 2x 16-bit with up to 4 channels, 2x

16-bit with up to 2 channels, 1x 16-bit ultra-lowpower

timer, 1x SysTick, 1x RTC, 2x 16-bit

basic for DAC, and 2x watchdogs

(independent/window)

? CRC calculation unit, 96-bit unique ID

? True RNG and firewall protection

? Hardware Encryption Engine AES 128-bit

? All packages are ECOPACK2

Description

The ultra-low-power STM32L082xx microcontrollers incorporate the connectivity power of

the universal serial bus (USB 2.0 crystal-less) with the high-performance Arm Cortex-M0+

32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), highspeed

embedded memories (up to 192 Kbytes of Flash program memory, 6 Kbytes of data

EEPROM and 20 Kbytes of RAM) plus an extensive range of enhanced I/Os and

peripherals.

The STM32L082xx devices provide high power efficiency for a wide range of performance.

It is achieved with a large choice of internal and external clock sources, an internal voltage

adaptation and several low-power modes.

The STM32L082xx devices offer several analog features, one 12-bit ADC with hardware

oversampling, two DACs, two ultra-low-power comparators, AES, several timers, one lowpower

timer (LPTIM), four general-purpose 16-bit timers and two basic timer, one RTC and

one SysTick which can be used as timebases. They also feature two watchdogs, one

watchdog with independent clock and window capability and one window watchdog based

on bus clock.

Moreover, the STM32L082xx devices embed standard and advanced communication

interfaces: up to three I2Cs, two SPIs, one I2S, four USARTs, a low-power UART

(LPUART), and a crystal-less USB. The devices offer up to 19 capacitive sensing channels

to simply add touch sensing functionality to any application.

The STM32L082xx also include a real-time clock and a set of backup registers that remain

powered in Standby mode.

The ultra-low-power STM32L082xx devices operate from a 1.8 to 3.6 V power supply (down

to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR

option. They are available in the -40 to +125 °C temperature range. A comprehensive set of

power-saving modes allows the design of low-power applications.