Features

? Kit content:

– the STEVAL-PROTEUS main board

– LiPo battery 3.7 V, 480 mAh

– Plastic case and screws

? Main components on the STEVAL-PROTEUS:

– STM32WB5MMG - ultra-low-power module, dual core 32-bit Arm Cortex-

M4 MCU 64 MHz, Cortex-M0+ 32 MHz for real-time radio layer, with

1 Mbyte of flash memory, 256kbyte SRAM, and 2.4GHz RF supporting

Bluetooth? Low Energy 5, 802.15.4, Zigbee 3.0, and Thread

– IIS3DWB - ultra-wide bandwidth up to 6 kHz, low noise, 3-axis digital

accelerometer

– ISM330DHCX - iNEMO inertial module with machine learning core and

finite state machine with digital output

– IIS2DLPC - high-performance ultra-low-power 3-axis digital accelerometer

– STTS22H - low-voltage, ultra-low-power, 0.5°C accuracy I2C/SMBus 3.0

temperature sensor

– 2Gb QSPI NOR flash memory for data storage

– STSAFE-A110 - secure element

– STBC02 - Li-Ion linear battery charger with LDO

– ST1PS02 - step-down converter with digital voltage selection

– Three push-buttons (one reset, one user, one power-on battery)

– Four LEDs (three user LEDs, one STBC02 LED status)

– Flexible power supply options - LiPo battery, USB power, and primary

battery

– SWD connector for debugging and programming capability

– 34-pin expansion connector compliant with STMOD+

? Temperature monitoring and vibration preprocessing data in the time and

frequency domain, machine learning, and AI to address industrial asset

monitoring

? STBLESensor app support for Android and iOS to ease the board and

processing configuration, condition monitoring, and anomaly detection

? Comprehensive software libraries and demonstration examples available

Description

The STEVAL-PROTEUS1 is an evaluation tool designed for temperature and

vibration monitoring. It is based on a 2.4 GHz multiprotocol wireless SoC to address

machine or facility condition monitoring for industrial applications.

The evaluation board simplifies the prototyping, evaluation and development of

wireless industrial sensor nodes to enable the predictive maintenance. It comes with

a LiPo battery and a plastic case. All components are mounted exclusively on the

top side of the PCB to ensure an easy mounting on other equipment. The included

comprehensive software and the firmware libraries with time and frequency domain

vibration analysis ease your software customization and can reliably improve your

time-to-market.

STM32WB5MMGH屬于RF/IF，射頻/中頻和 RFID > 射頻收發器模塊和調制解調器。意法半導體（ST）集團制造生產的STM32WB5MMGH射頻收發器模塊和調制解調器RF 收發器模塊用于發送和/或接收射頻信號。射頻系列/標準有藍牙、蜂窩、通用 ISM、GPS、導航、SiBeam、WiFi 和 802.15.4，頻率范圍為 70 MHz 至 65 GHz。數據速率為 600 bps 到 12.3 Gbps，功率輸出為 -10 dBm 到 54 dBm。