STNRGPF12集成電路（IC）的電源管理-專用規格書PDF中文資料

STNRGPF12屬于集成電路（IC）的電源管理-專用。由意法半導體集團制造生產的STNRGPF12電源管理 - 專用專用型電源管理集成電路 (PMIC) 用于電源的控制或操作，適合特定或小范圍的目標應用，例如汽車氣囊管理、電容器組平衡、AC 公共電力監控、存儲器總線端接、接地故障檢測、能量收集、小型引擎管理、處理器或芯片集專用電壓調節、負載突降保護、觸覺驅動器、熱電制冷器控制等。

Features

? Embedded digital inrush current limiter function

? Interleaved PFC digital controller

? Two interleaved channels PFC

? Continuous conduction mode

? Fixed frequency operation

? Average current mode control

? Mixed signal architecture

? Soft start-up management

? Burst mode support

? Load feed forward

? Input voltage feed forward

? Channel current balance function

? Programmable phase shedding

? Status indicator signaling for cooling system, PFC Fault and PFC OK

? Configurable driver by means of dedicated graphic tool

? Programmable fast overcurrent and thermal protection

? Serial communication port available for:

– Device programming;

– Monitoring of the PFC parameters

? Suitable for >600 W applications:

– Welding, air conditioner

– Industrial motors

– UPS, chargers, high power systems

? Customizable firmware

? Configuration via eDesign suite

? Embedded memory

– Program memory: 32 Kbytes flash

– Data retention 15 years at 85 °C after 10 kcycles at 25 °C

– Data memory: 1 Kbyte true data E2PROM; data retention: 15 years at 85

°C after 100 kcycles at 85 °C

– Flash and E2PROM with read while write (RWW) and error correction code

(ECC)

– RAM: 6 Kbytes

? Communication interfaces

– UART asynchronous protocol for bootloader support and monitoring of the

PFC parameters

? Operating temperature: -40 °C up to 105 °C

Description

The STNRGPF02/12 embed the Inrush Current Limiter function.

STNRGPF12 features a digital inrush current control generating two PWM’s signals

in order to drives the input semi-controlled bridge.

STNRGPF02 embeds inrush current control function setting high a signal that is used

to short a resistive element.