TA12D2工業(yè)自動化與控制的延時繼電器規(guī)格書PDF中文資料

Description

The TA Series prevents rapid recycling of a compressor. A

lockout delay is started when the thermostat opens, or input

voltage is lost. Eliminates tripped circuit breakers or blown

fuses caused by a locked rotor during short cycling. The TA

will not allow the compressor to start when the line voltage

is low. Chatter of the compressor relay is eliminated. Because

of the fast initiate time, bounce of the thermostat will not be

transmitted to the compressor relay coil. A 30 second delay

provides anti-reversing protection for scroll compressors.

Operation (Lockout)

On initial closure of the S1, the compressor relay energizes

immediately. When S1 opens or input voltage is interrupted, a

lockout time delay is initiated. During this lockout time delay,

the compressor relay cannot be energized. The low voltage

brownout) protection prevents energization of the compressor

when the line voltage is low.

Reset: The lockout time delay cannot be reset. After the time

delay is completed, the unit automatically resets.

Features & Benefits

FEATURES BENEFITS

Lockout delay

Prevents rapid cycling of compressor and eliminates

nuisance service calls due to blown fuse or tripped

breaker by locked rotor during short cycling

Anti-reversing protection

for scroll compressors Extends life of equipment

Brownout protection Timer will not allow the compressor to start during

low line voltage conditions

Encapsulated Protects against shock, vibration, and humidity

1A solid state output No moving parts to arc and wear out. Provides up to

100 million operations under typical conditions