TC3400集成電路（IC）的模數轉換器（ADC）規(guī)格書PDF中文資料

TC3400屬于集成電路（IC）的模數轉換器（ADC）。由微芯科技股份有限公司制造生產的TC3400模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

General Description

The TC3400 is a low cost, low power analog-to-digital converter based on Microchip’s Sigma-Delta technol ogy. It will perform 16-bit conversions (15-bit plus sign) at up to eight per second. The TC3400 is optimized for use as a microcontroller peripheral in low cost, battery operated systems. A voltage reference is included, or an external reference can be used.

The TC3400’s 2-wire microPort? digital interface is used for starting conversions and for reading out the data. Driving the SCLK line low starts a conversion. After the conversion starts, each additional falling edge (up to six) detected on SCLK for t4 seconds reduces the A/D resolution by one bit and cuts conversion time in half. After a conversion is completed, clocking the SCLK line puts the MSB through LSB of the resulting data word onto the SDAT line, much like a shift register. The part automatically sleeps when not performing a data conversion.

The TC3400 is available in a 8-Pin PDIP and a 8-Pin SOIC package.

Features

? 16-bit Resolution at Eight Conversions Per

Second, Adjustable Down to 10-bit Resolution at

512 Conversions Per Second

? 1.8V – 5.5V Operation, Low Power Operating

260μA; Sleep: 0.75μA

? microPort? Serial Bus Requires only two

Interface Lines

? Uses Internal or External Reference

? Automatically Enters Sleep Mode when not in use

Applications

? Consumer Electronics, Thermostats, CO

Monitors, Humidity Meters, Security Sensors

? Embedded Systems, Data Loggers, Portable

Equipment

? Medical Instruments